ANSI A8221 - For beveled edge doors - Non-rising removable pin with button tip and plug - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
Search Results "Fire-Building Surface"
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1265
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1363
A5121 - For beveled edge doors - Non-rising removable pin with button tip and plugs - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1361
ANSI A5122 - For beveled edge doors - Non-rising removable pin with button tip and plug - Two ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1264
ANSI A8221 - For square edge doors - Non-rising removable pin with button tip and plug - Four ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1360
ANSI A5122 - For square edge doors - Non-rising removable pin with button tip and plug - Two ball bearings - Reversible - For use in hospitals or other institutional type buildings...
-
Hager Companies Three Knuckle - Full Mortise Swing Clear Hinge AB7502
Description: - For beveled edge doors - ANSI A8121 - Non-rising removable pin with flush pin and plug - Reversible - For use in hospitals or other institutional type buildings...
-
Garaventa Elvoron CPL Vertical Platform Lift
The Elvoron CPL is designed to provide access for people with disabilities in commercial buildings....
-
Yale 6000 Series Commercial Exit Devices
With a range of mechanical and electromechanical functions available, the 6000 can be used in many types of commercial facilities, including office buildings, retail environments, and mixed-use...
-
Employee Parking Lot
Is there a difference between parking spaces marked or reserved for employees and parking spaces that are just in the back of the building, unmarked but intended for employees?...
-
WALK
[DSA-AC] An exterior prepared surface for pedestrian use, including pedestrian areas such as plazas and courts. (As differentiated from the definition of “Sidewalk”.)...
-
11B.707.7.1.3 Horizontally mounted display screen
90 degrees (horizontal) tipped away from the viewer, the center line of the display screen and other display devices shall be no more than 34 inches (864 mm) above the floor or ground surface...
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
R402.4 Reduced Vertical Clearance
The leading edge of the guardrail or barrier shall be located 685 mm (2.25 ft) maximum above the finish surface....
-
R409.10.1 Top and Bottom Extension at Ramps
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent ramp run....
-
1018.6 Openings
This section requires openings in the surface of beach access routes and resting intervals such as spaces between boards to not allow passage of a sphere more than 1/2 inch in diameter....
-
6.11.1 Natural Elements
regulations or Forest Service construction and maintenance standards may define clear space and limit the allowable extension of natural protruding objects over the beach access route surface...
-
SECTION#4
SECTION#4 For the following questions, please answer every item pertaining to the sub-base installation, if the sub-base installation was necessary due to the installation of the trail surface...
-
§ 38.25(b) Contrast
and the boarding edge of ramps or lift platforms shall have a band of color(s) running the full width of the step or edge which contrasts from the step tread and riser, or lift or ramp surface...
-
11B-307.3.1 Edges and corners
Where signs or other objects are mounted on posts or pylons, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects...
-
11B-307.3.1 Edges and corners
Where signs or other objects are mounted on posts or pylons, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects...
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Roughness Calculation
Therefore, if the depth of the cracks were doubled, the chair would have the exact same reaction to the surface....
-
DORMITORY
A space in a building where group sleeping accommodations are provided in one room, or in a series of closely associated rooms, for persons not members of the same family group, under joint...
-
12209(b)(3)(C)
The remedies and procedures shall be effective upon the approval of the Speaker, after consultation with the House Office Building Commission....
