To measure the clear opening of a standard hinged door, open the door to 90 degrees....
Search Results "FTDS: Federal Trail Data Standards"
-
Measuring Door Openings
-
11B-809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door....
-
Section 36.406(f) Assembly Areas
Assembly Areas In the NPRM, the Department proposed Sec. 36.406(f) to supplement the assembly area requirements of the 2004 ADAAG, which the Department is adopting as part of the 2010 Standards...
-
E2-a
[ADA Standards § 4.4.1] Yes No Note: These objects may be wall mounted or free standing....
-
A5
[ADA Standards § 4.6.6] Yes No If No, is there another area with a curb ramp and on an accessible route that could serve as the drop-off area?...
-
f-iv
[ADA Standards § 4.8.4] Yes No Note: The level landing may be part of the sidewalk or walking surface. Notes: 1. At least 36 inches between handrails 2....
-
504.2.1 Preservation of Accessibility Information in Format Conversion (Section-by-Section Analysis)
This proposed requirement is similar to § 1194.23(j) in the existing 508 Standards....
-
Equipment for Persons with Vision Impairments [4.34.5]
Equipment for Persons with Vision Impairments [4.34.5] Access for people with vision impairments was specified as a performance standard so that manufacturers could examine and develop...
-
A4.26.1 GENERAL
The maximum grab bar clearance of 1-1/2 in (38 mm) required in this standard is a safety clearance to prevent injuries from arms slipping through the opening....
-
Are public accommodations required to retrofit existing buildings by adding elevators?
The readily achievable standard does not require barrier removal that requires extensive restructuring or burdensome expense....
-
What constitutes a “passenger loading zone”?
Only those areas that are specifically designed or designated for passenger loading are considered “passenger loading zones” under the Standards....
-
Section 36.101 Purpose (Section-By-Section Analysis and Response to Comments)
of disability by public accommodations, requires places of public accommodation and commercial facilities to be designed, constructed, and altered in compliance with the accessibility standards...
-
11B-809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door....
-
Section 37.83 Remanufacture of Rail Vehicles and Purchase or Lease of Remanufactured Rail Vehicles by Public Entities Operating Rapid or Light Rail System
With respect to an entity having a class of historic vehicles that may meet the standards for the historic vehicle exception (e.g., San Francisco cable cars), the Department would not object...
-
11B-809.5.4 Prohibited use
[2010 ADA Standards] 809.5.4 Prohibited Use....
-
11B-809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door. ◼...
-
11B-206.4.7 Restricted entrances
[2010 ADA Standards] 206.4.7 Restricted Entrances....
-
809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door....
-
409.3.1 Power Operation
Elevator car and hoistway doors and gates shall be power operated and shall comply with ANSI/BHMA A156.19 (1997 or 2002 edition) (incorporated by reference, see "Referenced Standards" in...
-
Section 35.151(b) Alterations
describe standards for path of travel during alterations to a primary function....
-
Section 35.151(b) Alterations (Section-by-Section Analysis)
describe standards for path of travel during alterations to a primary function....
-
New Accessible Handpump for Campgrounds
The Missoula Technology and Development Center (MTDC) conducted an indepth market search and found no hand-operated water pumps meeting the Americans With Disabilities Act (ADA) standards...
-
11B-203.8 Residential facilities
. ◼ [2010 ADA Standards] 203.8 Residential Facilities....
-
Privacy: ADA Standard Section 707.4
considers the communication-related elements of ATMs to be auxiliary aids and services, rather than structural elements, to which the safe harbor for elements built in compliance with the 1991 standards...