302.6 Without Speech (Section-by-Section Analysis) This proposed section would clarify the requirements in existing 508 Standards §1194.31(e) and existing 255 Guidelines §1193.41(h) by...
Search Results "Applicable Standard"
-
302.6 Without Speech (Section-by-Section Analysis)
-
410.6.3.1 PSTN (Section-by-Section Analysis)
This is the current industry standard for TTY signals (also known as Baudot) at the PSTN interface....
-
Problem Four
Three standard parking spaces are converted into an accessible parking space with an access aisle....
-
Digital inclinometers (SmartTool®)
Digital inclinometers (SmartTool®), while slightly more expensive than standard levels, are easy to calibrate and use and can measure slopes in degrees, percent, and fractions per foot....
-
Are curved or circular ramps allowed?
Ramps without level landings at changes in direction typically will not meet the Standards due to resulting compound slopes....
-
Where Required: Site Arrival Points [§206.2.1]
Where Required: Site Arrival Points [§206.2.1] This guide explains scoping and technical requirements for accessible routes in the ADA Standards. ...
-
15(f)
(f) If, after January 26, 1993, HWI constructed an addition (as defined in ADA Standards § 3.4) to an Owned Hotel or Joint Venture Hotel that was originally constructed for first occupancy...
-
Further Guidance
Technical assistance and additional guidance on using the ADA Standards is available from the: U.S....
-
§ 37.42(d)(2)
(2) The railroad operator must submit a plan to FRA and/or FTA, describing its proposed means to meet the performance standard of paragraph (a) of this section at that station....
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
11B-407.4.6.2.1 Size and shape
[2010 ADA Standards] 407.4.6.2.1 Size. Buttons shall be ¾ inch (19 mm) minimum in their smallest dimension....
-
11B-407.2.2.1 Visible and audible signals
[2010 ADA Standards] 2. In existing elevators, a signal indicating the direction of car travel shall not be required....
-
PRIVATE BUILDING OR FACILITY
[2010 ADA Standards 106.5] Private Building or Facility....
- Kohler Branham Urinal K-4920-T-0
- Hager Companies 3500 Series Lever
- Kohler Branham™ Urinal K-4920-R-0
- Hager Companies Door Protection Plate 214S
-
36. Must an employer provide a reasonable accommodation for an employee with a disability who violated a conduct rule that is job- related for the position in question and consistent with business necessity?
An employer must make reasonable accommodation to enable an otherwise qualified employee with a disability to meet such a conduct standard in the future, barring undue hardship, except where...
- Landscape Forms Inc. 35: Guide Illuminated Bollards Video
-
602.3 Electronic Support Documentation (Section-by-Section Analysis)
This proposal for accessible electronic support documentation is derived from §§ 1194.41 and 1193.33 of the existing 508 Standards and 255 Guidelines respectively, but the requirement that...
-
226 and 902 Dining Surfaces and Work Surfaces
226 and 902 Dining Surfaces and Work Surfaces Section 226.1 of the 2010 Standards require that where dining surfaces are provided for the consumption of food or drink, at least five...
-
2.4
2.4 The United States shall be prohibited from filing suit against Cinemark for alleged violations of ADA Standard 4.33.3 with respect to any of Cinemark's Existing Theaters, any of...
-
ABBREVIATIONS
Reg. 7-26-91) plus revisions to date ANSI A117.1 American National Standard for Buildings and Facilities - Providing Accessibility and Usability for Physically Handicapped People -...
-
QUESTION: WHEN DO THE REQUIREMENTS OF SECTION 37.42 BEGIN TO APPLY?
ANSWER: The performance standard and other requirements of section 37.42(a) apply to stations that are approved for entry into final design or that begin construction or alteration...
