EXCEPTION: Where compliance with 809.2, 809.3, or 809.4 is technically infeasible, or where it is technically infeasible to provide an accessible route to a residential dwelling unit, the...
Search Results "Residential Dwelling Unit"
Commonly Searched Documents
- 
    
  
  233.3.4 Alterations
  
- 
    
  
  233.3.4 Alterations
  EXCEPTION: Where compliance with 809.2, 809.3, or 809.4 is technically infeasible, or where it is technically infeasible to provide an accessible route to a residential dwelling unit, the... 
- 
    
  
  11B-809.10.7.5 Controls
  Controls shall be mounted 44 inches (1118 mm) maximum above the finish floor. The force required to activate controls shall be 5 pounds (22.2 mm) maximum. 
- 
    
  
  11B-809.10.8.3 Cabinets
  Cabinets shall be removable without the use of specialized knowledge and/or tools. The finished floor shall extend to the wall under the lavatory. 
- 
    
  
  11B-809.9.7 Exposed pipes and surfaces
  Exposed water supply and drain pipes under sinks and lavatories shall comply with Section 11B-606.5. 
- 
    
  
  11B-809.9.2 Clear width
  Kitchens shall have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work... 
- 
    
  
  233.3.4.1 Alterations to Vacated Buildings
  Where a building is vacated for the purposes of alteration, and the altered building contains more than 15 residential dwelling units, at least 5 percent of the residential dwelling units... 
- 
    
  
  11B-409.1 General
  Private residence elevators that are provided within a residential dwelling unit required to provide mobility features complying with Sections 11B-809.2 through 11B-809.4 shall comply with... 
- 
    
  
  11B-409.1 General
  Private residence elevators that are provided within a residential dwelling unit required to provide mobility features complying with Sections 11B-809.2 through 11B-809.4 shall comply with... 
- 
    
  
  11B-409.1 General
  Private residence elevators that are provided within a residential dwelling unit required to provide mobility features complying with Sections 11B-809.2 through 11B-809.4 shall comply with... 
- 
    
  
  11B-229.1 General
  Glazed openings in residential dwelling units required to comply with Section 11B-809 shall not be required to comply with Section 11B-229. 2. ... 
- 
    
  
  233.3.4.1 Alterations to Vacated Buildings
  Where a building is vacated for the purposes of alteration, and the altered building contains more than 15 residential dwelling units, at least 5 percent of the residential dwelling units... 
- 
    
  
  604.4 Seats
  In residential dwelling units, the height of water closets shall be permitted to be 15 inches (380 mm) minimum and 19 inches (485 mm) maximum above the finish floor measured to the top of... 
- 
    
  
  604.4 Seats
  In residential dwelling units, the height of water closets shall be permitted to be 15 inches (380 mm) minimum and 19 inches (485 mm) maximum above the finish floor measured to the top of... 
- 
    
  
  604.4 Seats
  In residential dwelling units, the height of water closets shall be permitted to be 15 inches (380 mm) minimum and 19 inches (485 mm) maximum above the finish floor measured to the top of... 
- 
    
  
  604.4 Seats
  In residential dwelling units, the height of water closets shall be permitted to be 15 inches (380 mm) minimum and 19 inches (485 mm) maximum above the finish floor measured to the top of... 
- 
    
  
  § 36.406(d) Social service center establishments.
  Group homes, halfway houses, shelters, or similar social service center establishments that provide either temporary sleeping accommodations or residential dwelling units that are subject... 
- 
    
  
  11B-809.10.6.1 Size
  When one or more shower stalls are provided within the same dwelling unit, as least one shower stall shall comply with one of the following: A transfer type shower compartment... 
- 
    
  
  11B-604.5 Grab bars
  In residential dwelling units, grab bars shall not be required to be installed in toilet or bathrooms provided that reinforcement has been installed in walls and located so as to permit... 
- 
    
  
  1133A.2, Item 1
  1. A clear floor space at least 30 inches (762 mm) by 48 inches (1219 mm) that allows a parallel approach by a person in a wheelchair shall be provided at the range or cooktop. 
- 
    
  
  1132A.4, Item 4
  4. Secondary exterior doors onto decks, patios or balcony surfaces constructed of impervious materials (e.g., concrete, brick, flagstone) may have a maximum change in height... 
- 
    
  
  1133A.4, Item 1
  1. A minimum linear length of 30 inches (762 mm) of countertop shall be provided for the kitchen sink installation. 
- 
    
  
  1132A.9 Smooth surface
  1132A.9 Smooth surface. Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side... 
- 
    
  
  4.34.5* BATHROOMS
  Accessible or adaptable bathrooms shall be on an accessible route and shall comply with the requirements of 4.34.5. 
