[See subsections ...]
Search Results "Exam Room"
-
11B-213 Toilet facilities and bathing facilities
-
11B-805.5 Patient change areas
Areas where patients change or are prepared for a procedure shall comply with Section 11B-222.
-
11B-805.5 Patient change areas
Areas where patients change or are prepared for a procedure shall comply with Section 11B-222.
-
Toilet Rooms-Banquet Area
Toilet Rooms-Banquet Area: s....
-
9.2 Requirements for Accessible Units, Sleeping Rooms and Suites
[See subsections ...]
-
Protruding Objects
Protruding Objects: Some people who are blind or have low vision use canes to detect objects along a route. One element of a barrier-free meeting space for participants who are...
-
E. Smoking Rooms
E. Are smoking and non-smoking accessible guestrooms provided based upon the ratio of smoking and non-smoking guestrooms in the facility so persons with disabilities have the same...
-
4.3.5 HEAD ROOM
Accessible routes shall comply with 4.4.2.
-
Head Room [4.4.2]
Circulation paths must provide at least 80 inches of vertical clearance. Otherwise, fixed barriers detectable by canes must define areas with less clearance. Gates, rails, curbs, and...
-
Head Room [4.3.5]
The 80 inch minimum vertical clearance applies not only to accessible routes but to all circulation routes (see 4.4.2). Eighty-inch doors, including those equipped with closers, are...
-
4.3.5 Head Room
Accessible routes shall comply with 4.4.2.
-
Sec.36.102(a)(3)
(3) Private entity that offers examinations or courses related to applications, licensing, certification, or credentialing for secondary or postsecondary education, professional, or...
-
M302.2.3 Size
Transfer surfaces shall be 21 inches (610 mm) wide minimum and 17 inches (430 mm) deep minimum. The size of transfer surfaces shall be measured from center points of their opposing...
-
M302.3.2 Leg Supports
Where stirrups are provided, leg supports shall also be provided and comply with M305.4.
-
M302.3 Supports
Transfer supports, leg supports and reclining surfaces shall comply with M302.3.
-
M302.2 Transfer Surface
A transfer surface shall be provided and shall comply with M302.2.
-
1630.13(b)
(b) Examination or inquiry of employees. Except as permitted by section 1630.14, it is unlawful for a covered entity to require a medical examination of an employee or to make...
-
Employees
Employees The ADA strictly limits the circumstances under which an employer may ask questions about an employee's medical condition or require the employee to have a medical...
-
M302.3.1 Transfer Supports
Transfer supports shall be provided for use with transfer sides required by M302.2.4 and shall comply with M305.2.1.1, M305.2.2.1, and M305.2.3 through M305.2.8.
-
M302.3.1 Transfer Supports (Section-by-Section Analysis)
In the MDE NPRM the Access Board proposed that transfer supports must be provided for use with transfer sides on diagnostic equipment used by patients in the seated position, and...
-
M302.2.3 Size (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface size for diagnostic equipment used by patients in the seated position of 21 inches wide and 15 inches deep (proposed M302.2.2). The Access...
-
M302.2 Transfer Surface (Section-by-Section Analysis)
This is an introductory section.
-
M302.3 Supports (Section-by-Section Analysis)
This is an introductory section. An editorial change was made to this section as a result of the change in M302.3.2, described below, to replace the word “stirrups” with the term...
-
5.2.2.2 Transfer Surface Depth Recommendation for M302
5.2.2.2 Transfer Surface Depth Recommendation for M302 The Committee recommends a minimum depth requirement of 17 inches for equipment used by patients in seated...