Low Energy Doors and Gates [§404.3] Low energy doors and gates usually require activation by the user through a push plate or control and are often used in moderate traffic locations...
Search Results "Door Opening Angle"
-
Low Energy Doors and Gates [§404.3]
-
Doors [4.13]
[See subsections ...]
-
1132A.2 Interior doors and secondary exterior doors
1132A.2 Interior doors and secondary exterior doors....
-
H. Stall Door
If the accessible toilet is in a stall, is the stall door positioned diagonally opposite, not directly in front of, the toilet so persons who use wheelchairs may pull fully into the stall...
- Norton Surface Mounted 7100SZ Series SafeZone® Electromechanical Closer
- Norton Surface Mounted 5900 Series Low Energy Door Operator
-
C. Door Hardware
Is the door hardware (lever, pull, panic bar, etc.) usable with one hand, without tight grasping, pinching or twisting of the wrist, since many persons with disabilities may not have high...
-
Door and Gate Surfaces [§404.2.10]
Door and Gate Surfaces [§404.2.10] The bottom surface of doors and gates on the push side must be smooth to a height of at least 10”....
-
408.3.2 Swinging Doors
408.3.2 Swinging Doors. Swinging hoistway doors shall open and close automatically and shall comply with 404, 407.3.2 and 408.3.2....
-
Doors and Gates Operated Only By Security Personnel [§404.1, Ex]
Doors and Gates Operated Only By Security Personnel [§404.1, Ex] Manual doors, doorways, and gates that are designed to be operated only by security personnel, such as guards in...
-
Stadium-Style Movie Theaters
criteria: (i) it is located within the rear sixty percent (60%) of the seats provided in the auditorium; or (ii) it is located within the area of the auditorium where the vertical viewing angles...
-
206.5 Doors, Doorways, and Gates
206.5 Doors, Doorways, and Gates. Doors, doorways, and gates providing user passage shall be provided in accordance with 206.5....
-
4.17.5* Doors
Toilet stall doors, including door hardware, shall comply with 4.13....
-
1132A.2 Interior doors and secondary exterior doors
Except as allowed by Section 1109A.2, interior doors intended for user passage and secondary exterior doors shall comply with this section....
-
1132A.2 Interior doors and secondary exterior doors
Except as allowed by Section 1109A.2, interior doors intended for user passage and secondary exterior doors shall comply with this section....
-
404.2.6 Doors in Series and Gates in Series
404.2.6 Doors in Series and Gates in Series....
-
404 Doors, Doorways, and Gates
404 Doors, Doorways, and Gates...
-
4.13.5 Clear Width
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the opposite stop (see Fig. 24(a), (b), (c), and (d...
- ADAEZ Pro Plus Automatic Door Opener Locating Operator Mounting Bracket Video
-
A. Door Width
Door Width....
-
4.17.5* DOORS
Toilet stall doors shall comply with 4.13....
- DORMA ED900 Low-Energy Swing Door Operator
-
4.13.5 CLEAR WIDTH
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the stop (see Fig. 24(a), (b), (c), and (d))....
-
Are closet doors and pantry doors required to comply?
Requirements for doors, doorways, and gates in §404 apply to those that provide “user passage” (§206.5). Doors serving walk-in closets or pantries must comply....