The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
Search Results "Cooking Surface"
Filters
Commonly Searched Documents
-
1002.4.2 Slope
-
M302.2 Transfer Surface
M302.2 Transfer Surface M302.2.3 Transfer Sides Proposed requirement: The transfer surface shall be located to provide options to transfer from a mobility device onto one short...
-
Accessibility
Accessibility Tests of the surfaces with the rotational penetrometer (Figure 3 and 4) began one week after the surfaces were formed and continued monthly (Tables 2 and 3)....
-
1013.2.2 Surface
The surface of the clear ground space shall be firm and stable. The surface shall allow use of tent stakes and other tent securement devices....
-
1013.2.2 Surface
The surface of the clear ground space shall be firm and stable. The surface shall allow use of tent stakes and other tent securement devices....
-
General: ADA Standard Section 226.1
Section 226.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dining surfaces and work surfaces.
-
Aluminum Swaged SG Series Pressure-Locked Grating
Slip resistant & serrated surfaces also available....
-
Wheelchair accessible seating is required. At least one percent of the seating must be wheelchair seating locations.
Each wheelchair seating location is an open, level space that accommodates one person using a wheelchair and has a smooth, stable, and slip-resistant surface....
-
High work surface
All of the seating spaces/work surfaces were approximately 42" high....
-
Aluminum Dove Tail Series Pressure-Locked Grating
Slip resistant & serrated surfaces also available....
-
11B-226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with Section 11B...
-
302.3 Openings
Openings in floor or ground surfaces shall not allow passage of a sphere more than 1/2 inch (13 mm) diameter except as allowed in 407.4.3, 409.4.3, 410.4, 810.5.3 and 810.10....
-
Rotational Penetrometer
A wheelchair caster placed on a spring loaded caliber in a metal tripod frame which suspends the caster about 6 inches over the surface. ...
-
Height: ADA Standard Section 902.4.2
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.
-
Findings
The following are the predominant findings from this study: No single type of surface material/system was found to be the most accessible surface or better than others when comparing...
-
4.19.4 EXPOSED PIPES AND SURFACES
There shall be no sharp or abrasive surfaces under lavatories....
-
4.19.4 Exposed Pipes and Surfaces
There shall be no sharp or abrasive surfaces under lavatories....
-
Why a smooth surface door or kickplate is important
And those nicks slice your fingers like butter when you least expect it.
-
Dimensions for Adults and Children: ADA Standard Section 102
Section 102 of the ADA Standards covers information on the dimensions for adults and children.
-
11B-102 Dimensions for adults and children
this chapter includes technical requirements based on children’s dimensions and anthropometrics for drinking fountains, water closets, toilet compartments, lavatories and sinks, dining surfaces...
-
1.1.2 Walks
Measure walks and other non - ramp pedestrian surfaces for overall running slope and cross slope as well as local running slope and cross slope variations (flatness) in accordance with 1.1.3...
-
403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
Tile Tech Pavers® Stamp-Tech™ Series Pavers
Its irregular top surface was developed from actual sections of stone. By rotating the direction of the pavers during installation the natural effect is complete....
