Something can be accessible but not usable: a door can be built to correct specifications, with proper maneuvering space, but space can be blocked by furniture or otherwise be made unusable...
Search Results "Parking Space"
Commonly Searched Documents
-
Usable (Section-by-Section Analysis)
-
Portable Floor Lifts
While these lifts may be less expensive than overhead lifts, they require more maneuvering space in the room and space for storage....
-
Lighting Contrast and Conceptual Design
So [I had an old ] space. It was old design. In February of 2002, we moved into the new office of the chief architect....
- Boddingtons GrassCarpet™ Grass Protection Matting
-
T704 Announcement Systems
For stop announcement systems, signs must be provided onboard and be viewable from all wheelchair spaces and priority seats....
- Durateq® Handheld ATV (Assistive Technology Version) Device
-
Hybrid Surface Systems
Another playground owner chose to have its site installed by a combined crew of the manufacturer and park maintenance personnel. ...
-
I. Introduction to the Study
Between 5,650 and 8,770 playgrounds at public schools and municipal parks are estimated to be replaced; and 380 to 520 new playgrounds are constructed at public schools and municipal parks...
-
Alterations to Existing Elevators
When a single space or element is altered, the 1991 Standards, at sections 4.1.6(1)(a) and (b), require the space or element to be made accessible....
-
Section 4.1.5, Additions (Preamble, Section-by-Section Analysis)
But additions also have attributes of new construction, and to the extent that a space or element in the addition is newly constructed each new space or element must comply with the applicable...
-
Designated Aisle Seats
Comments stated that requiring designated aisle seats to be on an accessible route would require more space and entrances to seating areas and would result in the loss of seating space....
-
R304.5.1.2 Shared Use Paths
As proposed in the NPRM, R304.5.1 would require the clear width of curb ramp runs (excluding flared sides), blended transitions, and turning spaces to be 4 feet minimum....
-
The International Symbol of Accessibility (ISA)
The ISA continues to be recognized worldwide as a symbol identifying accessible elements and spaces....
-
Using the Polling Place Checklist
Using the Polling Place Checklist Tools and Documentation A few simple tools may be used to measure the sizes and the slope of specific elements and spaces: • A metal tape measure...
-
Technical Requirements for Accessible Hiker/Pedestrian Trails
Section 7.4 of FSTAG explains the accessibility requirements for trails, including trail surfacing, clear tread width, grade and cross slope, resting intervals, passing spaces, tread obstacles...
-
Surface Slopes
The proposed rule would have required clear ground spaces to have slopes not steeper than 1:50 in any direction, and would have permitted slopes not steeper than 1:33 when necessary for...
-
1017.1 General
The technical requirements address the surface of the trails, passing spaces, and resting intervals (1017.2); the clear tread width of trails (1017.3); passing spaces (1017.4); tread obstacles...
-
203 General Exceptions
., with racks or shelves) to be accessible. 203.9 Employee Work Areas: Spaces and elements within employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3...
-
III-1.5200 Scope of exemption
If a nonreligious entity operates a community theater or other place of public accommodation in donated space on the congregation's premises, is the nonreligious entity covered by title...
-
3.3.11 180-Degree Turn
The space requirements for a 180-degree turn are similar across countries, ranging from 1500 mm (59 in.) in the U.K. and Canada to 1540 mm (60.6 in.) in Australia....
-
11B-810.4 Bus signs
shall comply with Sections 11B-703.5.1 _|Finish and Contrast|_ through 11B-703.5.4 _|Character Proportions|_, and Sections 11B-703.5.7 _|Stroke Thickness|_ and 11B- 703.5.8 _|Character Spacing...
-
R305.1.1 Dome Size
Where the truncated domes are arrayed radially, they may differ in diameter and center-to-center spacing within the ranges specified in R305.1.1 and R305.1.2....
-
1132A.1 Primary entry doors and required exit doors
The requirements of Sections 1126A.3 shall apply to maneuvering clearances at the side of the door exposed to common or public use spaces (e.g., entry or exit doors which open from the covered...