ILLUSTRATION 1: A private summer camp requires parents to fill out a questionnaire and to submit medical documentation regarding their children's ability to participate in various camp activities...
Search Results "Grade 1 Braille"
-
III-4.1300 Unnecessary inquiries
-
1.1.7 Measurement of parking areas
These areas should be considered as a pedestrian walk with a minimum width of 60 in. and a length of approximately 20 ft and with an ADA/ABA - AG maximum slope of 1:48 in both directions...
-
Carpet [§302.2]
The standards specify the maximum pile height (1/2” measured to the backing, cushion, or pad) and texture (level or textured loop, level cut pile, or level cut/uncut pile) and require firm...
-
Curb Ramps
ramp is located where pedestrians must walk across the ramp, or where it is not protected by handrails or guardrails, it shall have flared sides; the maximum slope of the flare shall be 1:...
-
11B-707.3 Operable parts
Exceptions: 1. Drive-up only automatic teller machines and fare machines shall not be required to comply with Sections 11B-309.2 and 11B-309.3. 2....
-
11B-232.2.1.3 Substitute cells
required mobility features in substitute cells (cells other than those where alterations are originally planned), provided that each substitute cell meets the following conditions: 1....
-
407.1 General
Elevators shall comply with 407 and with ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1). They shall be passenger elevators as classified by ASME A17.1....
-
308.3.1 Unobstructed
EXCEPTIONS: 1. An obstruction shall be permitted between the clear floor or ground space and the element where the depth of the obstruction is 10 inches (255 mm) maximum. 2....
-
407.1 General
Elevators shall comply with 407 and with ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1). They shall be passenger elevators as classified by ASME A17.1....
-
302.1 General
EXCEPTIONS: 1. Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant. 2....
-
202.6.1
EXCEPTION: 1. The path of travel requirements of 202.4 shall not apply to measures taken solely to comply with federal architectural barrier removal requirements. 2....
-
210.1 General
EXCEPTIONS: 1. In detention and correctional facilities, stairs that are not located in public use areas shall not be required to comply with 504. 2....
-
610.3.2 L-Shaped Seats
The rear edge of the "L" portion of the seat shall be 1½ inches (38 mm) maximum from the wall and the front edge shall be 14 inches (355 mm) minimum and 15 inches (380 mm) maximum from the...
-
Shopping Center or Shopping Mall
(1) A building housing five or more sales or rental establishments; or (2) A series of buildings on a common site, either under common ownership or common control or developed either...
-
Good Practices of Accessible Urban Development: Making Urban Environments Inclusive and Fully Accessible to ALL
universal design4 approached planning, allocation of necessary resources, and a broad-based partnership that involves and engages all community members, including persons with disabilities. 1...
-
Fair Housing Act Design Manual
It carries out two statutory responsibilities: (1) to provide a clear statement of what actions on their part will provide them with a "safe harbor"; and (2) to provided guidance in the...
-
McGuire Manufacturing Co., Inc. 1152WC: Offset with 152 Wide Top Strainer
Offset sink strainer with chrome plated wrought brass 4 1/2" wide top sink strainer. 1 3/4" x 4 1/2" OD....
-
FB@>>https://www.facebook.com/SonaBudsReview/
initial Blog:- https://sites.google.com/view/sonabudstranslationearbuds/home Blog:- https://eventprime.co/o/SonaBudsTranslationEarbuds Blog:- https://sonabudstranslationearbuds-1....
-
11B-213.3.1 Toilet compartments
When the July 1, 2015 Supplement to the 2013 CBC was issued, this scoping was increased, thereby exceeding the 2010 ADAS scoping at large multi-user toilet rooms....
-
Smooth Surface
This provision requires that parts creating joints in the smooth surface are to be within 1/16 inch of the same plane as the other....
-
§ 382.5 Individual with a disability
As used in this definition, the phrase: (a) Physical or mental impairment means: (1) any physiological disorder or condition, cosmetic disfigurement, or anatomical loss affecting one...
-
§382.3 Individual with a disability
As used in this definition, the phrase: (a) Physical or mental impairment means: (1) Any physiological disorder or condition, cosmetic disfigurement, or anatomical loss affecting one...
-
F104.1.1 Construction and Manufacturing Tolerances
For example, if this document requires "1½ inches," avoid specifying "1½ inches plus or minus X inches."...
