[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
Search Results "Safety Requirement"
-
11B-404.2.5 Thresholds
-
11B-222.2 Coat hooks and shelves
shelves are provided in individual compartments at least one of each type complying with Section 11B-803.5 shall be provided in individual compartments in dressing, fitting, or locker rooms required...
-
Transfer Steps: ADA Standard Section 1009.5.4
Where possible, the height of the transfer step should be minimized to decrease the distance an individual is required to lift up or move down to reach the next step to gain access....
-
Height: ADA Standard Section 1005.2.1
or sections 1012.2 and 1012.3 of the International Building Code (2003 edition) (incorporated by reference, see “Referenced Standards” in Chapter 1) is provided, the guard shall not be required...
-
BATHROOM
A compartmented bathroom is considered a single unit and is subject to the requirements of Chapters 11A and 11B....
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
-
Clearance: ADA Standard Section 804.2
EXCEPTION: Spaces that do not provide a cooktop or conventional range shall not be required to comply with 804.2. Advisory 804.2 Clearance....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-222.2 Coat hooks and shelves
shelves are provided in individual compartments at least one of each type complying with Section 11B-803.5 shall be provided in individual compartments in dressing, fitting, or locker rooms required...
-
Assembly Area
For the purposes of these requirements, assembly areas include, but are not limited to, classrooms, lecture halls, courtrooms, public meeting rooms, public hearing rooms, legislative chambers...
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
Exception: Within secure perimeter of detention and correctional facilities, geometric symbols shall not be required to be ¼ inch (6.4 mm) thick....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
Exception: Within secure perimeter of detention and correctional facilities, geometric symbols shall not be required to be ¼ inch (6.4 mm) thick....
-
11B-809.9.1 Clear floor space
For a parallel or forward approach to the sink and to the work surface required by Sections 11B-809.9.3 and 11B-809.9.4....
-
11B-809.9.1 Clear floor space
For a parallel or forward approach to the sink and to the work surface required by Sections 11B-809.9.3 and 11B-809.9.4....
-
BATHROOM
A compartmented bathroom is considered a single unit and is subject to the requirements of Chapters 11A and 11B....
- Renewing the Commitment: An ADA Compliance Guide for Nonprofits
- RESNA Standards Committee on Inclusive Fitness
- Michigan Rehabilitation Services (MRS)
- Assisted Living Directory - Ohio Assisted Living Facilities & Senior Care
- Visitability
- Independence Unlimited - Hartford, CT
-
New Construction
New Construction The 2010 Standards, which set requirements for fixed elements and spaces, require that all new pool facilities built by State and local governments, public accommodations...
-
612 Saunas and Steam Rooms
Section 612 provides requirements for saunas and steam rooms and includes requirements for benches and turning space....