accessible place and manner, a private entity must -- Assure that the examination measures what it is intended to measure, rather than reflecting the individual's impaired sensory, manual...
Search Results "MUTCD: Manual on Uniform Traffic Control Devices for Streets and Highways"
Commonly Searched Documents
-
XII. Examinations and Courses
-
M101.6 Dimensional Tolerances (Section-by-Section Analysis)
Another commenter, a medical association, asserted that tolerances are in operator manuals....
-
404.2.4.1 Swinging Doors and Gates
Table 404.2.4.1 Maneuvering Clearances at Manual Swinging Doors and Gates Type of Use Minimum Maneuvering Clearance Approach Direction Door or Gate Side...
-
Foreign Air Carriers
Therefore, while the majority of this manual does not expressly apply to foreign carriers, they should look to this document and part 382 in satisfying their general nondiscrimination obligations...
-
Wheelchair Turning Space [4.2.3]
Circular Turns The most efficient way of making a half or full turn in a manual wheelchair is by turning the wheels in opposing directions....
-
2.2 Lighting Conditions
On each trial one measurement of horizontal illuminance was manually recorded from a Minolta T-1 Illuminance meter....
-
5. Conclusions
Manual WCs users are more susceptible to harmful WBVs, and as surface roughness increases, they are exposed to a larger increase in vibrations than power WC users....
-
III 4.2500 Accessible or special-goods
The ADA does not require that manufacturers provide warranties or operating manuals that are packed with the product in accessible formats....
-
Are You Protected by The ADA?
A substantial impairment is one that significantly limits or restricts a major life activity such as hearing, seeing, speaking, walking, breathing, performing manual tasks, caring for oneself...
-
Can I Get Additional ADA Information and Assistance?
In January 1992, EEOC published a Technical Assistance Manual, providing practical application of legal requirements to specific employment activities, with a directory of resources to aid...
-
Q. Who is protected against employment discrimination?
substantial, as distinct from minor, impairments, and that these must be impairments that limit major life activities such as seeing, hearing, speaking, walking, breathing, performing manual...
-
PUBLIC HOUSING
For additional information see “Guide to Public Housing Regulated in Chapter 11B of the California Building Code” and the “California Access Compliance Advisory Reference Manual” available...
-
607.4.2.1 Back Wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
11B-407.2.1.4 Location
A destination-oriented elevator system provides lobby controls enabling passengers to select floor stops, lobby indicators designating which elevator to use, and a car indicator designating...
-
607.4.1.1 Back Wall
Each grab bar shall be installed 15 inches (380 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall. [ECTCR UFAS 4.34.5.4(3), Fig. 48(b)]...
-
703.4.1 Height above Finish Floor or Ground
[ECTCR UFAS 4.30.6] EXCEPTION: Tactile characters for elevator car controls shall not be required to comply with 703.4.1....
-
604.9.6 Dispensers
Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow....
-
Set the Automatic Volume Adjustment
If volumes are adequate in quiet conditions, but do not increase enough or quickly enough when ambient noise increases, the microphone sensitivity, or automatic gain control, may need to...
-
11B-607.4.2.1 Back wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
607.4.2.1 Back Wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
28.1 Q. If an architect or builder chooses to follow the bathroom specifications in Requirement 7...are the other bathrooms in the dwelling unit required to have reinforced walls for grab bars?
The same would be true for other Requirements in the Guidelines, such as Requirement 5, which applies to usable light switches, electrical outlets, thermostats and other environmental controls...
-
608.2.2.1 Clearance
EXCEPTION: A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls...
-
407.2 Contrast (Section-by-Section Analysis)
407.2 Contrast (Section-by-Section Analysis) This section proposes that keys and controls, where provided, contrast visually from background surfaces....