When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor....
Search Results "End Transfer Surface"
-
11B-704.4.1 Height
-
11B-308.3.2 Obstructed high reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor....
-
11B-308.3.2 Obstructed high reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
1133A.2 Clear floor space
A clear floor space at least 30 inches (762 mm) by 48 inches (1219 mm) that allows either a parallel or a forward approach shall be provided at the work surface required by Section 1133A...
-
308.3.2 Obstructed High Reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
604.7 Dispensers
paper dispensers are installed above the side wall grab bar, the outlet of the toilet paper dispenser must be 48 inches (1220 mm) maximum above the finish floor and the top of the gripping surface...
-
5.8.2.1 Height of Breast Platform at Time of Measurement
However, the top surface of the breast platform is a well-defined surface, and defines where the patient’s chest will be during the exam....
-
Alterations to Existing Facilities
For example, if an alteration project involves only installing pedestrian signals at existing intersections and there are no detectable warning surfaces on the curb ramps at the intersections...
-
Slopes and Resting Intervals for Beach Access Routes
When the surface is paved or is built with boards, the cross slope is not allowed to be steeper than 1:48 (2 percent)....
-
Bradley Towel Dispenser 250-33
Surface Mounted C-Fold/Multi-Fold Towels White Enamel Finish Stainless Steel...
-
11B-404.2.9 Door and gate opening force
and the centerline of the second push plate shall be 30 inches (762 mm) minimum and 44 inches (1118 mm) maximum above the floor or ground surface....
-
11B-404.2.9 Door and gate opening force
and the centerline of the second push plate shall be 30 inches (762 mm) minimum and 44 inches (1118 mm) maximum above the floor or ground surface....
-
11B-404.2.9 Door and gate opening force
and the centerline of the second push plate shall be 30 inches (762 mm) minimum and 44 inches (1118 mm) maximum above the floor or ground surface....
-
EZ-ACCESS Transitions® Modular Entry Ramp
It is made with high-strength aluminum that will never rust or corrode and has an extruded slip-resistant surface to increase safety....
-
James E. Woods, Ph.D., P.E. Natural Lighting for Persons with Low Vision
Somebody questioned a minute ago: What is the ratio of daylight on the surface, horizontal surface, to the lighting level that you want inside? That’s a daylight factor....
-
How I Get Bullet Echo Free Bucks and Coins
feeling sneaky, but if I want consistent rewards I’ll switch to someone tankier or more team-friendly (hello, Leviathan or Stalker) so I can actually survive long enough to collect the juicy end-of-match...
-
SDC Push Plate Switch
1-11/16” Narrow Mullion Push Plate Switch – Recessed, Surface Box or Bollard Mount....
-
AJW Architectural Products UG3-A Series UG3-A12 12" Concealed Snap Flange, 1.5" Diameter Grab Bar - Configuration A
Transfer mounting points (3 per flange) to wall. Drill pilot holes and secure bar with proper anchors per application. Snap cover over mounting plate....
-
AJW Architectural Products UG130-A Series UG130-A12 12" Exposed Flange, 1.5" Diameter Grab Bar - Configuration A
Transfer mounting points (3 per flange) to wall. Drill pilot holes and secure bar with proper anchors per application....
-
AquaTrek2 ADA Step System
Wheels on the bottom of the AquaTrek2 Pool Steps allow for ease of transfer into and out of the pool. The deck anchors and all fasteners are made of the finest stainless steel....
-
SafetySign Van Accessible Parking Sign (White Text and Border)
Graphics are printed with translucent inks, thermal transfer, digitally or translucent film....
-
SafetySign Van Accessible Parking Signage (Green Text and Border)
Graphics are printed with translucent inks, thermal transfer, digitally or translucent film....
