Openings in the surface of beach access routes and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1018.6 Openings....
Search Results "Floor Surface"
-
1018.6 Openings
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
11B-707.6.3.2 Tactile symbols
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
707.6.3.2 Tactile Symbols
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
705.1.1 Dome Size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (23 mm) minimum and 1.4 inches (36 mm) maximum, a top diameter of 50 percent of the base diameter minimum...
-
How should we describe facilities that only meet some of the accessibility guidelines?
For instance, you can let people know that the main floor of the office is accessible but other floors can be reached by stairway only, and provide instructions on how to visit someone whose...
-
11B-610.3 Shower compartment seats
The top of the seat shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
-
11B-610.3 Shower compartment seats
The top of the seat shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
-
American Standard Madera 1.28 gpf ADA Toilet with Exposed Manual Flush Valve System
Elongated floor mount flushometer valve toilet, top and back spud, less seat High Effeciency, low consumption 1.28 GPF Conventional glazed Fully glazed 2-1/8” trapway...
-
American Standard Madera 1.6 gpf ADA Toilet with Exposed Manual Flush Valve System
Elongated floor mount flushometer valve toilet, top and back spud, less seat High Effeciency, low consumption 1.6 GPF Conventional glazed Fully glazed 2-1/8” trapway...
-
Spectrum Aquatics Gallatin Water Powered Assisted Access Lift
The Gallatin pool and spa lift requires no more than 12″ of total depth (deck to floor/bench) for proper installation....
-
Nova Health Products LiteRamp 10' Wheelchair and Scooter Ramp (LR10)
combined Full size: 10' long x 29.75" wide Folded suitcase size: 68" long x 15" wide x 4-1/2" thick Each piece weighs 29 lbs Material: aluminum Surface...
-
Nova Health Products LiteRamp 7' Wheelchair and Scooter Ramp (LR7)
lb combined Full size: 7' long x 29.75" wide Folded suitcase size: 46" long x 15" wide x 4-1/2" thick Each piece weighs 19 lbs Material: aluminum Surface...
-
Nova Health Products LiteRamp 8' Wheelchair and Scooter Ramp (LR8)
lb combined Full size: 8' long x 29.75" wide Folded suitcase size: 54" long x 15" wide x 4-1/2" thick Each piece weighs 23 lbs Material: aluminum Surface...
-
Step ‘n Wash Sink Step
Perfect Safety Record – used over 250 million times Reduces liability by keeping restroom floors dry and safe Self-retracting step – always out of the way when not in use...
-
ACO Premium Linear QuARTz Drain
QuARTz shower channels allow the bathroom floor to take on a new dimension to become an integral part of the design....
-
Elevated Accessible Routes
narrowed width permitted for 24-inch (610 mm) length to accommodate features in the composite structure 12-inch (305 mm) rise maximum per ramp run Top of handrail gripping surfaces...
-
REFERENCES
., Proposed Surface Roughness Standard for Pathways used by Wheelchairs. Transportation Research Board 93nd Annual Meeting, 2014(14-4494). 5....
-
M301 Diagnostic Equipment Used by Patients in Supine, Prone, or Side-Lying Position; M302 Diagnostic Equipment Used by Patients in Seated Position
Except for the size of the transfer surface (see M301.2.2 and M302.2.2) and certain supports (see M301.3.2 for stirrups, and M302.3.2 for armrests), the technical criteria in these sections...
-
§ 38.95(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.125(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.83(b)(13) Handrails
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
