Use standard colors and shapes and group similar functions together....
Search Results "1991 Standards"
-
Paragraph (i) (Advisory Guidance)
-
Wheeled Mobility Anthropometry Project
The Access Board is considering specifying alternative technical criteria in the final standards based on the Wheeled Mobility Anthropometry Project....
-
Paragraph (b) (Advisory Guidance)
These cues should follow standard conventions, and can be used to reduce the need to read labels (or read labels more than the first time)....
-
Accessible Routes - Interior and Exterior
ADA Standards 4.1.2 (1); 4.1.3(1); 4.3. At least one route that is a minimum of 36 inches wide without steps, stairs, or other abrupt level changes must be provided...
-
Circulation Paths
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
-
1.9.1 Division of the State Architect - Access Compliance.
.◼ In addition, to incorporate standards at least as restrictive as those required by the federal government for barrier-free design under (1) Title III (Public Accommodations and Commercial...
-
11B-706.1 General
The technical standards for assistive listening systems describe minimum performance levels for volume, interference, and distortion....
-
1.9.1 Division of the State Architect - Access Compliance.
. ◼ In addition, to incorporate standards at least as restrictive as those required by the federal government for barrier-free design under (1) Title III (Public Accommodations and...
-
11B-205.1 General
[2010 ADA Standards] 3....
-
B. How Does a TTY Work?
Computers with TTY modems generally operate in American Standard Code for Information Interexchange (ASCII), an electronic “language.”...
-
ALIGNMENT OF 19-INCH RECOMMENDATION WITH ACCESS BOARD PROPOSED RULEMAKING
under static conditions, without compression or deflection in the transfer surface ….”8 The Access Board’s proposal also explained that it is considering a requirement in the final standards...
-
Where must the wheelchair symbol be posted?
Don't use the ISA on the entry sign for any facility that does not meet the Federal accessibility standards completely, or you will have some unhappy customers....
-
Accessible Cells in Detention and Correctional Facilities (Section-by-Section Analysis)
A two percent (2%) standard would fall far short of meeting the needs of this largely bedridden population. ...
-
§35.130(b)(2) (Section-by-Section Analysis)
Consistent with these standards, public entities are required to ensure that their actions are based on facts applicable to individuals and not on presumptions as to what a class of individuals...
-
Performance for Surface Firmness and Stability
Also of note was that the standard deviation for stability with the EWF was the highest at .13, double that of any other surface type. ...
-
1.2 Legal Requirements.
Finally, it clarifies that entities subject to 49 CFR part 37, implementing the ADA, must utilize the design, construction, and alteration standards in Appendix A of 49 CFR part 37. 1.2.1.2...
-
II. Recommendations of Diagnostic Imaging Equipment Manufacturers on Transfer Surface Low Height
During the meetings of the Advisory Committee, there was no compelling evidence presented in support of a minimum transfer low height of 17 inches as the new standard for access....
-
Roughness Calculation
Because of the multitude of tires available for WCs, it was decided to choose a "standard wheel" for the analysis....
- Bradley 3-Station Frequency Lavatory System FL-3H & FL-3L
- Stanley QCL 100 Series Grade 1 Heavy Duty Cylindrical Locks
- AJW Architectural Products U169 Series Lever Operated, Roll Towel Dispenser - Surface Mounted
- Inpro ENDURANT® Velox™ Trench Receptor
- Activar Construction Products Group Vision Lite with Privacy Door PDVSL
- Ampetronic HLS02 Intercom & Information Point Audio Induction Loop Driver Hearing System