Transfer supports should be provided for imaging equipment with transfer surfaces with depths of less than or equal to 24 inches....
Search Results "Door Surface"
-
5.4.1.2 Transfer and Positioning Support Location for Imaging Equipment
-
Slope
The incline of a surface....
-
Slope
The incline of a surface. ...
-
Accessible parking
When parking is near the main door of the facility, these patrons have strength left after entering your business to shop, enjoy entertainment, or eat heartily....
-
e-vi
Are signs mounted on both sides of the elevator hoist way door opening (for each elevator and at each floor) that designate the floor with 2-inch minimum-height raised letters and Braille...
-
Sec.36.207(b)
the residence covered under paragraph (a) of this section extends to those elements used to enter the place of public accommodation, including the homeowner's front sidewalk, if any, the door...
-
4.3.3 WIDTH
The minimum clear width of an accessible route shall be 36 in (915 mm) except at doors (see 4.13.5)....
-
Edge Protection
Edge Protection Where railings, guards, or handrails are provided, edge protection must be provided and extend a minimum of 2 inches above the ground or deck surface....
-
22. How can I get copies of the ASTM standards that apply to play areas?
American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, Pennsylvania 19428, www.astm.org: ASTM F 1292-99 Standard Specification for Impact Attenuation of Surface...
-
SEAT HEIGHT MEASUREMENT DETAIL
Note that examination tables and chairs only use bolsters on certain areas of the transfer surface....
-
1.3.2 Focus Following NPRM Comments
This review identified four major issue areas for the MDE Advisory Committee to address, as follows: Transfer surface height and size Permitted obstructions to the transfer surface...
-
I. Public Toilet Rooms
In all public and common use toilet rooms throughout the Hotel and the Tower, Defendants will provide at least one lavatory with a counter-top that is 34 inches above the finish floor surface...
-
Card Catalogs and Magazine Displays [8.4]
Requirements for fixed counters and tables [4.32] specify a surface height (34 inches maximum) and knee clearance below appropriate for extended use as a writing/work surface....
-
EZ-ACCESS Transitions® Angled Entry Mat
It does not interfere with the door track and works especially well with sliding glass doors. It is made with 100% recycled rubber and provides a smooth and safe entry or exit....
-
Landscape Forms Inc. Presidio Trash Receptacle
download our Presidio Receptacle includes 30-gallon capacity polyethylene liner Side or top opening styles Constructed of 5/8in. solid metal rod welded to 1-1/4in. steel frame Hinged door...
-
Inpro Corporation ENDURANT® Ceiling Hung Partitions
Our celling Hung privacy partitions are manufactured from BioPrism® Solid Surface featuring an industry leading bio-resin blend....
-
Inpro Corporation ENDURANT® Floor-Mounted Overhead-Braced Partitions
Our floor-mounted overhead-braced privacy partitions are manufactured from BioPrism® Solid Surface featuring an industry leading bio-resin blend....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
1011.2.4 Openings
Openings in the clear ground space surface shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1011.2.4 Openings. ...
-
1011.2.4 Openings
Openings in the clear ground space surface shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1011.2.4 Openings....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
IMPLICATION OF A 19-INCH MINIMUM STANDARD FOR THE HIGHEST POINT IN THE LOWEST ADJUSTABLE POSITION
However, shorthand references to 19 inches as the minimum standard as used in this minority report should not be equated with a 19-inch transfer surface height, for two major reasons....
-
¼ Inch Minus Limestone
The surface was installed in two rolled and compacted 3 inch lifts....
