Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2....
Search Results "Water Closets"
Filters
Commonly Searched Documents
-
604.6 Flush Controls
-
Murdock Manufacturing Barrier-Free 14-Gage Stainless Steel Bi-Level Wall Mount Water Cooler
A172.8FGVR Series is a self-contained, pressure bi-level water cooler....
-
604.8.1.2 Doors
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
11B-604.8.1.2 Doors
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
11B-602.3 Operable parts
The flow of water shall be activated by a manually operated system that is front mounted or side mounted and located within 6 inches (152 mm) of the front edge of the fountain or an automatic...
-
Dispensers: ADA Standard Section 604.7
Section 604.7 covers the current ADA Standards for toilet paper dispensers.
-
Transfer Steps
The steps must extend into the water a minimum of 18 inches below the stationary water level....
-
Kohler Primary Elongated Toilet Bowl with Seat
The Primary toilet offers a low bowl height to accommodate users in kindergartens, grade schools, daycare centers and children's wards all while saving water....
-
Big John Toilet Support & Short Swivel Support informational video
Big John Toilet Support - Valuable Safety & Installation Information anyone with a wall hung toilet should view.
-
Big John Toilet Support & Short Swivel Support 7.5" to 14" Installation Video
The Big John Toilet Seat Support is the secure solution for supporting wall mounted toilets. The Big John Toilet Support mounts underneath the toilet bowl working in conjunction...
-
Big John Toilet Support & Short Swivel Support 5" to 7.5" Installation Video
This video is a Big John Toilet Support Short Swivel Installation Tutorial.
-
11B-1009.2.1 Pool lift location
Pool lifts shall be located where the water level is 36 inches (914 mm) minimum and 48 inches (1219 mm) maximum. [2010 ADAS] 1009.2.1 Pool Lift Location. ...
-
11B-1009.2.1 Pool lift location
Pool lifts shall be located where the water level is 36 inches (914 mm) minimum and 48 inches (1219 mm) maximum. [2010 ADAS] 1009.2.1 Pool Lift Location....
-
4.7.2 Controls and Operating Mechanisms
Water hydrants and water utility hookups shall not be required to comply with the operable parts requirements in ABAAS section 309.4 until models that comply are readily available from more...
-
1009.5.4 Transfer Steps
The surface of the bottom tread shall extend to a water depth of 18 inches (455 mm) minimum below the stationary water level. Advisory 1009.5.4 Transfer Steps....
-
805.4 Toilet and Bathing Rooms
Where provided, no fewer than one water closet, one lavatory, and one bathtub or shower shall comply with the applicable requirements of 603 through 610....
-
805.4 Toilet and Bathing Rooms
Where provided, no fewer than one water closet, one lavatory, and one bathtub or shower shall comply with the applicable requirements of 603 through 610....
-
(1)(e)
(e) Doorways on the end of the enclosure, opposite the water closet, should have a minimum clear opening width of 32 inches (815 mm)....
-
4.1.3(12)(a)
(a) If fixed or built-in storage facilities such as cabinets, shelves, closets, and drawers are provided in accessible spaces, at least one of each type provided shall contain storage space...
-
11B-1009.2.1 Pool lift location
Pool lifts shall be located where the water level is 36 inches (914 mm) minimum and 48 inches (1219 mm) maximum. [2010 ADA Standards] 1009.2.1 Pool Lift Location....
-
604.8.1.2 Doors
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
604.8.1.4 Toe Clearance
EXCEPTION: Toe clearance at the front partition is not required in a compartment greater than 62 inches (1575 mm) deep with a wall-hung water closet or 65 inches (1650 mm) deep with a floor-mounted...
-
604.8.1.2 Doors
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
1009.2.8 Submerged Depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
