Edge protection complying with 405.9.1 or 405.9.2 shall be provided on each side of ramp runs and at each side of ramp landings. EXCEPTIONS: 1....
Search Results "Vehicle Ramp"
Filters
Commonly Searched Documents
-
405.9 Edge Protection
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings at perpendicular curb ramps shall extend 36 inches (914 mm) in the direction of travel....
-
§ 38.95(c)(6)(i) Requirement
When in use for boarding or alighting, the ramp or bridge plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to displacement when loading...
-
SafePath Courtedge™ Reducer Ramps
SafePath™ produces CourtEdge™ Reducer Ramps for almost every floor transition requirement from ½” up to 2-1/2” in standard models and custom heights exceeding 4-1/2”....
-
DSA Drawing 11B-406-10 Parallel Curb Ramp with No Gutter (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
7 [§ 4.7.8]
7 [§ 4.7.8] Curb ramps must be located where they will not be obstructed by parked vehicles....
-
For EV with the charging port at rear of the vehicle, can EV be assumed to be able to back in the parking space for easy access to the charger at the head location?
RESPONSE: This practice is not regulated by the CBC Chapter 11B accessibility provisions. DSA is not aware of any restrictions on this practice.
-
11B-812.8.4 Ambulatory
Ambulatory EVCS shall not be required to be identified by an ISA.
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2).
-
Can an operator require a person to transfer from a wheelchair to a vehicle seat?
Section 37.165(e) of the DOT ADA regulations allows persons who use wheelchairs to transfer to a vehicle seat, if one is available....
-
Can an operator require a person to transfer from a wheelchair to a vehicle seat?
Section 37.165(e) of the DOT ADA regulations allows persons who use wheelchairs to transfer to a vehicle seat, if one is available....
-
11B-812.5.3 Relationship to accessible routes
Vehicle spaces and access aisles shall be designed so that when the vehicle space is occupied the required clear width of adjacent accessible routes is not obstructed....
-
11B-812.7 Access aisle
Two vehicle spaces or one parking space and one electric vehicle charging space shall be permitted to share a common access aisle....
-
§ 37.13 Effective date for certain vehicle specifications
[56 FR 64215, Dec. 9, 1991]
-
§ 38.83(b)(2)(i) Requirements
The controls shall be interlocked with the vehicle brakes, propulsion system, or door, or shall provide other appropriate mechanisms or systems, to ensure that the vehicle cannot be moved...
-
235.3 Boarding Piers at Boat Launch Ramps
235.3 Boarding Piers at Boat Launch Ramps....
-
405.9.1 Extended Floor or Ground Surface
The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a handrail complying with 505....
-
§ 38.23(d)(5) Movement
accordance with manufacturer's instructions, the securement system shall limit the movement of an occupied wheelchair or mobility aid to no more than 2 inches in any direction under normal vehicle...
-
Re: 405 Ramps
A ramp with a direction change requires a 60" x 60" minimum intermediate landing, which isn't just a turning space but also a place for stopping to allow for a turn....
-
11B-405.10 Wet conditions
Landings subject to wet conditions shall be designed to prevent the accumulation of water.
-
11B-812.6.3 Ambulatory
Vehicle spaces serving ambulatory EVCS shall be 120 inches (3048 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
11B-812.6.3 Ambulatory
Vehicle spaces serving ambulatory EVCS shall be 120 inches (3048 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
EZ-ACCESS Suitcase Singlefold Ramp Video
Requires the Registered User plan or above. Login! -
405.9.1 Extended Floor or Ground Surface
The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a handrail complying with 505....
