The door opening clear width above a height of 48 inches (1220 mm) measured from the lowest step tread shall be permitted to taper so as to reduce in width to 18 inches (457 mm) minimum....
Search Results "Permit"
-
T502.4 Doorways with Steps on Over-the-Road Buses
-
11B-304.2 Floor or ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved. Advisory 11B-304.2 Floor or ground surface Exception....
-
Corbin Russwin Inc. DC5000 Series Cam Action Door Closer
The door closer's wide range of adjustable closing power permits use in the most demanding situations....
-
Tile Tech Pavers® Coral-Pave™
Any of our standard size options or custom sizes (order size permitting) above can be manufactured in this design....
-
Sargent 351 Series Aluminum Door Closer
Features ANSI/BHMA A156.4 Grade 1 Conforms to UL10C and UBC for positive pressure fire test 10-year warranty Versatile mounting applications permit standard, top jamb, parallel...
-
Yale 51 Series Industrial Door Closer
• Standard, separate and independent, latch, sweep and backcheck intensity valves • 2-7/8" (73mm) projection • All standard arm applications allow doors to swing 180°, conditions permitting...
-
Johnny G KRANKcycle® Cross Trainer by Matrix
Narrow crank axis permits higher RPM and proper biomechanics. Adjustable Headstock Adjustable crank arm height encourages greater range of muscle activation....
-
Tile Tech Pavers® Oceanic™ Series - Wave-Pave™
Any of our standard size options or custom sizes (order size permitting) above can be manufactured in this design....
-
504.4 Tread Surface
Changes in level are not permitted. EXCEPTION: Treads shall be permitted to have a slope not steeper than 1:48. Advisory 504.4 Tread Surface....
-
11B-813.2.10 Door swing
A door, in any position, shall be permitted to encroach into the turning space by 12 inches (305 mm) maximum....
-
§ 38.159(c)(5) Slope
If the height of the vehicle floor from which the ramp is deployed is 3 inches (75 mm) or less above a 6 inch (150 mm) curb, a maximum slope of 1:4 is permitted; if the height of the vehicle...
-
Doors and Gates: ADA Standard Section 410.6
Section 410.6 covers the current ADA Standards for the doors and gates of platform lifts.
-
Beveled: ADA Standard Section 303.3
Section 303.3 covers the current ADA Standards for beveled level changes.
-
Landings: ADA Standard Section 405.7
Section 405.7 covers the current ADA Standards for ramp landings.
-
Visible Signals: ADA Standard Section 407.2.2.2
Section 407.2.2.2 covers the current ADA Standards for elevator visible signals.
-
Handrail Extensions: ADA Standard Section 505.10
Section 505.10 covers the current ADA Standards for handrail extensions.
-
Clear Floor or Ground Space: ADA Standard Section 804.3.1
EXCEPTION: Cabinetry shall be permitted under the kitchen work surface provided that all of the following conditions are met: (a) the cabinetry can be removed without removal or replacement...
-
11B-813.2.1.2 Clearance
Changes in level are not permitted....
-
11B-405.9.2 Curb or barrier
ETA Editor's Note CBC requires either a curb or a barrier for edge protection at ramps, and does not recognize the extended floor or ground surface also permitted by 2010 ADA Standards...
-
11B-304.3.2 T-Shaped space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm....
-
11B-405.9.2 Curb or barrier
ETA Editor's Note CBC requires either a curb or a barrier for edge protection at ramps, and does not recognize the extended floor or ground surface also permitted by 2010 ADA Standards...
-
11B-304.3.2 T-Shaped space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm....
-
1.1.5 Referenced codes
The National Fire Codes, standards, and the Fire Protection Handbook of the National Fire Protection Association are permitted to be used as authoritative guides in determining recognized...
-
11B-813.2.1.2 Clearance
Changes in level are not permitted....
