Controls or switches intended to be used by the occupant of the room or area to control lighting and receptacle outlets, appliances, alarms or cooling, heating and ventilating...
Search Results "Electric Vehicle Connector"
-
1136A.2 Switch and control heights
-
11B-205.1 General
Electrical or communication receptacles serving a dedicated use shall not be required to comply with Section 11B-309. 3. Reserved. [2010 ADAS] 3. ...
-
11B-205.1 General
Electrical or communication receptacles serving a dedicated use shall not be required to comply with Section 11B-309. 3. Reserved. [2010 ADAS] 3. ...
-
Section 37.165 Lift and Securement Use
An entity's vehicle is not required to pick up a wheelchair user when the securement locations are full, just as the vehicle may pass by other passengers waiting at the stop if the bus is...
-
11B-233.3.1.2.5 Public housing facility site impracticality
Electrical receptacle and switches complying with Section 11B-308.1. 5. Toilet and bathing facilities complying with Section 11B-809.4. 6. ...
-
Section 37.89 Remanufacture of Intercity and Commuter Rail Cars
In addition, this section differs from the counterpart sections for non-rail vehicles and light and rapid rail vehicles in two ways....
-
§ 38.53(a)(2)
or mobility aid users can be accommodated, then such doorway shall have a minimum clear opening of 30 inches to permit wheelchair and mobility aid users to be evacuated to an adjoining vehicle...
-
§ 38.159(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll or pitch) in any direction between its unloaded position and its position...
-
11B-233.3.1.2.6.5 Additional requirements.
Electrical receptacles, switches and controls complying with Section 11B-809.12. 8. Faucets complying with Section 11B-809.10.8.6. 9....
-
Section 37.85 Purchase or Lease of New Intercity and Commuter Rail Cars
We would point out that the ADA applies this requirement to all new vehicles....
-
§ 38.159(c)(6) Attachment
When in use for boarding or alighting, the ramp shall be firmly attached to the vehicle so that it is not subject to displacement when loading or unloading a heavy power mobility aid and...
-
§ 38.35(a)
(a) Vehicles in excess of 22 feet in length, used in multiple-stop, fixed-route service, shall be equipped with a public address system permitting the driver, or recorded or digitized human...
-
§ 35.151(b)(4)(i)(B)
(B) For the purposes of this section, alterations to windows, hardware, controls, electrical outlets, and signage shall not be deemed to be alterations that affect the usability of or access...
-
§ 35.151(b)(4)(i)(B)
(B) For the purposes of this section, alterations to windows, hardware, controls, electrical outlets, and signage shall not be deemed to be alterations that affect the usability of or access...
-
Floor and Ground Surfaces: ADA Standard Section 503.4
Section 503.4 covers the current ADA Standards for the floor and ground surfaces at passenger loading zones.
-
1012.4 Surface
The surface of parking spaces and pull-up spaces shall be firm and stable.
-
T303 Handrails, Stanchions, and Handholds
[See subsections ...]
-
T210 Wheelchair Spaces
[See subsections ...]
-
T214 Operable Parts
[See subsections ...]
-
T207 Handrails, Stanchions, and Handholds
[See subsections ...]
-
14. In § 38.93(d)(3)
§ 38.93 [Amended] 14. In § 38.93(d)(3), remove the period at the end of the paragraph and add the following words: “,ensuring compliance with section 37.42, where applicable.” in...
-
1012.5 Slope
The slope of the surface of parking spaces and pull-up spaces shall not be steeper than 1:48 in any direction. EXCEPTION: Where the surface is other than asphalt, concrete, or...
-
1012.4 Surface
The surface of parking spaces and pull-up spaces shall be firm and stable.
-
§ 37.197 Remanufactured OTRBs
[See subsections ...]