Where solid partitions or security glazing separate visitors from detainees or inmates at least one of each type of cubicle or counter partition shall comply with Section 11B-904.6....
Search Results "Counter Height"
Filters
Commonly Searched Documents
-
11B-232.5.2 Partitions
-
606.3 Lavatory Height
-
4.8.5(5)
(5) Top of handrail gripping surfaces shall be mounted between 34 in and 38 in (865 mm and 965 mm) above ramp surfaces.
-
4.9.4(5)
(5) Top of handrail gripping surface shall be mounted between 34 in and 38 in (865 mm and 965 mm) above stair nosings.
-
The Brewer Company, LLC
for adjustable height transfer surfaces....
-
Mockett TLRAL27 Roma Series Adjustable Table Leg
Just rotate the barrel, move the leg up or down to the right height, and twist the barrel closed....
-
609.4 Side Wall Grab Bar Height
-
609.4 Rear Wall Grab Bar Height
-
4.1.2 Surface Design of Examination Tables and Chairs
Thus, contouring must be addressed in considering minimum height standards for accessibility of transfer surfaces (Section 5.1.4)....
-
Bed Height Fact Sheet
Hotels need to adopt the recommended bed height range so individuals can safely transfer to and from the bed....
-
4.30.6 Mounting Location and Height
4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
§ 38.113(d)(2) Exception
New cars operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height....
-
Parallel Grab Bars
With respect to the lower grab bar at bathtubs, the specified mounting height has been changed to a range of 8 inches minimum to 10 inches maximum above the rim of the bathtub....
-
Handrails
...are there handrails on both sides of the stair at a uniform height of 34"-38" above the front edge of the step?...
-
1133A.4.1, Item 4
4. Finished flooring shall be extended to the wall beneath the sink and work surface.
-
4.30.6 MOUNTING LOCATION AND HEIGHT
Interior signage shall be located alongside the door on the latch side and shall be mounted at a height of between 54 in and 66 in (1370 mm and 1675 mm) above the finished floor....
-
Accessible Route Into and Through the Business
Staff the accessible sales counters and check-out aisles during all business hours....
-
Diversified Woodcrafts 9010 ARM Lab Table Accessory
With the adjustable rotating unit people in wheelchairs, pregnant women, obese, tall, and short people are able to take advantage of raising and lowering the ARM to the height that works...
-
GPK Modular QuadDesk
In addition, while a conventional desk with a fixed height of 26" to 29" would force you into uncomfortable and ergonomically unsafe postures and positions, the QuadDesk's height can be...
-
Conclusions
The results of the expert review of the literature highlight the need for future studies particularly as it relates to how environmental factors such as height and gap distances, use of...
-
§ 38.73(d)(1) Requirements
shall be coordinated with the boarding platform or mini-high platform design so that the horizontal gap between a vehicle at rest and the platform shall be no greater than 3 inches and the height...
-
Position [§305.5]
A side approach is typically provided or required at sales and service counters, beds, and most appliances. Forward Approach Side Approach Centering...
-
National Council on Independent Living
National Council on Independent Living MDE Minority Paper for a 17 inch low Transfer Surface Height Submitted to the U.S....
-
Medical Diagnostic Equipment Advisory Committee
Medical Diagnostic Equipment Advisory Committee MEDICAL DIAGNOSTIC EQUIPMENT ADVISORY COMMITTEE - Minority Report Regarding: 17 Inch Low Transfer Surface Height 09.27.13 These...
