All work is required to comply with the applicable codes and standards. Plans and specifications must accurately describe the full extent of the work to be performed....
Search Results "ITU-T: International Telecommunications Union Telecommunications Standardization Sector"
Filters
Commonly Searched Documents
-
Looking at Cal Green 5.106.5.3, we must provide the conduits and panel capacity for future installation for the required number of spaces (2 in this case). However, it is only when the equipment is to be installed that we need to refer to CBC and CEC. Section 11B-228.3.1 also reiterates this. Therefore, we would show the location of the conduit stub outs adjacent to 2 current parking spaces and would show space on the electric panel for the future equipment – and that is all. At this time, we do not need to show the requirements for EV accessibility when equipment is installed per Chapter 11B. Is my interpretation correct?
-
Ramp
Ramped surfaces used for transferring are not currently part of the standards but are present in some real world transfer situations. ...
-
§104.3(l) Qualified handicapped person
section 612 of the Education of the Handicapped Act; and (3) With respect to postsecondary and vocational education services, a handicapped person who meets the academic and technical standards...
-
Subtitle A: State and Local Government Activities
State and local governments are required to follow specific architectural standards in the new construction and alteration of their buildings....
-
RESOURCES
Additional information about the ADA’s requirements, including the 2010 ADA Standards, is available on the Department’s ADA Website at www.ada.gov....
-
604.2 Location
ETA Editor’s Note: The prior standards allowed construction tolerances to occur on either side of an 18” absolute dimension....
-
Design Guidelines for Environmental Illness
There is no statutory authority for the Department to create the type of design and construction standards suggested by the commenters....
-
Section 1. Introduction
Additionally, Section 1 explains that only those sections of the ANSI Standard cited in the Guidelines are required for compliance with the accessibility requirements of the Fair Housing...
-
QUESTION: WHERE THE TRACK ADJACENT TO A PLATFORM IS NOT SHARED WITH FREIGHT, ARE THERE ANY CIRCUMSTANCES IN WHICH AN APPROACH OTHER THAN LEVEL BOARDING IS ALLOWABLE?
If FRA or FTA agrees that level boarding is not physically feasible, then the railroad would meet the performance standard of section 37.42(a) at the station through the means and process...
-
PLANNING FOR SUCCESS
And officials should be familiar with the 2010 Standards before undertaking any alterations or new construction projects....
-
806.3 Guest Rooms with Communication Features
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility....
-
Accessibility Evaluation Surveys
During an accessibility evaluation survey, compare each portion of a structure to the accessibility standards, and record compliance and deficiencies....
-
402.2 Speech-Output Enabled
Speech output shall be delivered through a mechanism that is readily available to all users, including, but not limited to, an industry standard connector or a telephone handset....
-
The National Shelter System and Physical Accessibility - Time to Look Under the Hood
What follows is a list of questions and concerns regarding NSS’s information accuracy, surveyor competencies, and uniformity in applying standardized policies and procedures across divisions...
-
IV. Discussion of Findings and Implications
A playground surface with poured-in-place rubber had a use zone found in non-compliance with the ASTM standard for impact attenuation. ...
-
FAQ: Why should I enter keywords in my Voices post?
post is integrated with Corada’s existing database of other accessibility-related material, so your question, comment, Opinion or Interpretation will be in context with applicable federal standards...
-
Alterations Affecting Primary Function Areas [§202.4]
DOJ’s 2010 ADA Standards and DOT’s ADA regulations contain detailed provisions on alterations to primary function areas that must be applied in addition to section 202.4....
-
1.1.16 Alternate measurement tools
The waviness index method is described in ASTM E 1486, Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria....
-
Are accessible parking spaces required on a site where valet service is provided but vehicles are parked off site, such as in a public parking garage or on public streets?
Public garages and other parking facilities subject to the Standards must comply and provide accessible parking spaces in any case....
-
Head and Back Support (M301.3.3 and M302.3.3)
Although not required by the proposed standards, examination tables that can be adjusted to a sitting position and then reclined to a horizontal position may be easier for patients with...
-
Error/Omission: Adequate maneuvering clearance is not provided at doors, including doors to accessible toilet stalls.
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
-
Error/Omission: Parts of an accessible route with slopes that exceed 1:20 lack required features including handrails and edge protection.
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....