Exceptions: 1. Reserved. 2. Reserved. [2010 ADAS] 2. Existing elevators shall not be required to comply with the requirements for frequency and dB range of audible signals....
Search Results "Grade 1 Braille"
-
11B-407.2.2.3 Audible signals
-
11B-812.6 Vehicle spaces
Exceptions: 1....
-
§ 38.71(d)
37.93 of this title shall comply with §38.75, §38.77(c), §38.79(a) and §38.83(a) of this part and shall have, in new and key stations, at least one door which complies with §§38.73 (a)(1)...
-
1.1.12 Validity
ETA Editor's Note Sections from California Building Code Chapter 1 that are not adopted by the Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
11B-1008.2.4.2 Elevated
Exceptions: 1....
-
11B-1007.3.2 Golf club reach range area
shall be within 36 inches (914 mm) maximum of a clear floor or ground space 36 inches (914 mm) wide minimum and 48 inches (1219 mm) long minimum having a running slope not steeper than 1:...
-
11B-221.2.1.5 Stadium-style movie theaters
The required wheelchair spaces shall be located on risers or cross-aisles in the stadium section that satisfy at least one of the following criteria: 1. ...
-
1003.1 Applicability
(DSA-AC & HCD 1-AC) In addition to the requirement of this chapter, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required...
-
11B-705.1.1.3 Color and contrast
Exceptions: 1....
-
11B-1007.3.2 Golf club reach range area
shall be within 36 inches (914 mm) maximum of a clear floor or ground space 36 inches (914 mm) wide minimum and 48 inches (1219 mm) long minimum having a running slope not steeper than 1:...
-
1.1.12 Validity
ETA Editor's Note Sections from the California Building Code Chapter 1 that are not adopted by the Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
1003.1 Applicability
(DSA-AC & HCD 1-AC) In addition to the requirement of this chapter, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required...
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
-
11B-227.2 Check-out aisles
NUMBER OF CHECK-OUT AISLES OF EACH FUNCTION MINIMUM NUMBER OF CHECK-OUT AISLES OF EACH FUNCTION REQUIRED TO COMPLY WITH 11B-904.3 1...
-
11B-227.2 Check-out aisles
NUMBER OF CHECK-OUT AISLES OF EACH FUNCTION MINIMUM NUMBER OF CHECK-OUT AISLES OF EACH FUNCTION REQUIRED TO COMPLY WITH 11B-904.3 1...
- Rockwood Manufacturing Company 604 Door Guard - Solid Cast Brass
-
Section 36.205 Association (Preamble, Section-by-Section Analysis)
Section 36.205 Association Section 36.205 implements section 302(b)(1)(E) of the Act, which provides that a public accommodation shall not exclude or otherwise deny equal goods, services...
-
A. Providing Equally Effective Communication
of the ADA, all state and local governments are required to take steps to ensure that their communications with people with disabilities are as effective as communications with others.1 ...
-
1129B.3, Item 2
Accessible parking spaces shall be located as near as practical to a primary entrance and shall be sized as follows: 1. … 2. Van space(s). ...
-
Architectural Barriers Act
See 29 U.S.C 792 (b) (1) and (e). 8The Architectural Barriers Act also covers facilities constructed, altered, or leased by federal agencies; and facilities constructed or altered by...
-
How this guide is organized
There are three main sections in this guide: Section 1....
-
IBC Comparison
The comparison is ordered according to the format and sequence of the new ADA Accessibility Guidelines, which the Board published in the Federal Register on July 23, 2004 (column 1)....
-
5 “G’s” Getting Access to Health Care for People with Physical Disabilities
By June Isaacson Kailes, Associate Director Center for Disability Issues and the Health Professions Western University of Health Sciences jik@pacbell.net 2008 Version 1...
-
1016.4 Passing Spaces
Where passing spaces and resting intervals overlap, the technical requirements for resting intervals in 1016.8.3 require the slope of the surface to not be steeper than 1:48 in any direction...