patients undergoing these procedures receive some form of sedation prior to transfer.CC When sedated, all patients – regardless of their physical abilities – are assisted onto the transfer surface...
Search Results "Ground Surface"
-
4.3.3 Imaging Equipment Used for Interventional and Biopsy Procedures with Sedated Patients
-
Beach Access Routes
A beach access route is a continuous, unobstructed path that crosses the surface of the beach and provides pedestrians access to the water....
-
Front grab bar protocol
The preferred grab bar height was measured between the floor and the top of the grab bar surface. ...
-
Maintenance (Trail Terminology)
trails, clearing the trail of encroaching brush or grasses, and removing rock slides Maintaining trail tread, such as filling ruts, reshaping a trail bed, repairing a trail surface...
-
Edge Protection [4.8.7]
A rail mounted close enough to the ramp surface to prevent passage of a 4 inch diameter sphere can function like a curb in keeping front casters from getting stuck on vertical posts and...
-
382.19 May carriers refuse to provide transportation on the basis of disability?
This concept, grounded in the Americans with Disabilities Act, calls on carriers to make an individualized assessment (e.g., as opposed to a generalization or stereotype about what a person...
-
Accessible Sports Facilities
ADAAG addresses only the built environment (structures and grounds). The guidelines do not address operational issues....
-
(1) Site impracticality
nonelevator building having a common entrance for all units), the final Guidelines provide that regardless of which test is utilized by a builder or developer, at least 20% of the total ground...
-
11B-703.5.5 Character height
TABLE 11B-703.5.5 VISUAL CHARACTER HEIGHT HEIGHT TO FINISH FLOOR OR GROUND FROM BASELINE OF CHARACTER HORIZONTAL VIEWING DISTANCE MINIMUM...
-
6. RECEIVERS AND COUPLERS: RECOMMENDATIONS
• The output jack of all ALD receivers should accommodate a 1/8" (3.5mm) stereo plug using a TRS (tip, ring, sleeve) configuration, with the sleeve always carrying the ground....
-
III-2.6000 "Regarded as."
of others towards the impairment; ILLUSTRATION: B, a three-year old child born with a prominent facial disfigurement, has been refused admittance to a private day care program on the grounds...
-
DETR
Height was taken from the ground to the highest point, either chair or person....
-
11B-703.5.5 Character height
TABLE 11B-703.5.5 VISUAL CHARACTER HEIGHT Height To Finish Floor Or Ground From Baseline Of Character Horizontal Viewing Distance Minimum Character Height...
-
SHOPPING CENTER (OR SHOPPING MALL)
A shopping center may include a series of buildings on a common site, connected by a common pedestrian access route on, above or below the ground floor, that is either under common ownership...
-
11B-703.5.5 Character height
TABLE 11B-703.5.5 VISUAL CHARACTER HEIGHT Height To Finish Floor Or Ground From Baseline Of Character Horizontal Viewing Distance Minimum Character Height...
-
Sales and Service Counters
This provides a lowered surface where goods and services and money can be exchanged. An alternative solution is to provide an auxiliary counter nearby....
-
TTYs
This included a requirement that the touch surface of TTY keypads be 30 to 34 inches high (704.4.1). Comment....
-
11B-703.4.2 Location
When tactile signs are mounted inconsistently on surrounding wall surfaces, or mounted on the door itself, they are difficult to find and may create a safety hazard....
-
M305.2.4 Cross Section (Section-by-Section Analysis)
The Access Board sought input in MDE NPRM preamble question 21, on whether the gripping surfaces of current transfer supports on different types of equipment meet the cross sectional dimensions...
-
5.8.1.1 Clear Platform Size Recommendation
33.8 34 -- -- -- 34.5 The Wheeled Mobility Anthropometry Project recommends a minimum flat surface...
-
T402 Ramps and Bridgeplates
The technical requirements for ramps and bridgeplates in the 2016 Non-Rail Vehicle Guidelines include provisions on design load, installation and operation, emergency operation, surfaces...
-
F - number system
The flatness number also gives an indication of the "bumpiness" of the surface. The F - number system develops two number ratings, the FF and the FL....
-
11B-703.4.2 Location
When tactile signs are mounted inconsistently on surrounding wall surfaces, or mounted on the door itself, they are difficult to find and may create a safety hazard....
-
11B-703.4.2 Location
When tactile signs are mounted inconsistently on surrounding wall surfaces, or mounted on the door itself, they are difficult to find and may create a safety hazard....