Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
Search Results "Clear Floor Area"
Filters
Commonly Searched Documents
-
11B-608.2.2 Standard roll-in type shower compartments
-
Boddingtons GrassCarpet™ Grass Protection Matting
Ideal for outdoor events, weddings, exhibitions, concerts and marquee paths and flooring Ideal for temporary wheelchair access routes Allows a professional clean 'carpet' path for the...
-
21.1 Q. Is a dwelling unit that has a split entry foyer...required to be accessible if it is a ground floor unit in a covered multifamily dwelling?
A. Yes. Under Requirement 4, there must be an accessible route into and through the dwelling unit. This would preclude a split level foyer, unless a properly sloped ramp can be...
-
Section 35.151(g)(3)
As the Department explained in the NPRM, however, this provision was not designed to prohibit temporary seating that increases seating for events (e.g., placing temporary seating on the floor...
-
Section 35.151(f) Housing at a place of education
There are other differences between the two sets of standards as well with respect to requirements for accessible windows, alterations, kitchens, accessible route throughout a unit, and clear...
-
General [4.5.1]
Affected industries (floor finishes, ceramic tile, and plumbing fixtures) each employ a different testing method in designating the slip-resistance of their products....
-
Rebuilding Together Kent County - Chestertown, MD
Our volunteers have donated over 7000 hours, with a market value of more than $170,000, to demolish and rebuild a kitchen addition; reconstruct a front porch; repair plumbing, floors, roofs...
-
1007.2.1 Elevators required
In buildings where a required accessible floor is four or more stories above or below a level of exit discharge, at least one required accessible means of egress shall be an elevator complying...
-
A4.1.3(10)
A4.1.3(10) If an odd number of drinking fountains is provided on a floor, the requirement in 4.1.3(10)(b) may be met by rounding down the odd number to an even number and calculating 50%...
-
Summary of Major Provisions
The final rule adds new technical requirements for floor surfaces, bedrooms, and weather alert systems in emergency transportable housing units with mobility features....
-
M. Reach Range
Are the rod and shelf in the clothes closet or wall mounted unit within 54" of the floor for side approach or 48" of the floor for forward approach so persons who use wheelchairs can approach...
-
U-Shaped: ADA Standard Section 804.2.2
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1525...
-
Panda S.15 All Wood with Aluminum Core Lift & Slide System
Glazing: Clear Low-E tempered-insulated 1″ glass is the standard. Various types of glass and other materials at a thickness of up to 1″ may be used....
-
Panda S.12 Solid Wood Lift & Slide System
Glazing: Clear Low-E insulated is the standard. Various types of glass and other materials at a thickness of up to 1″ may be used. Optional integrated blinds are available....
-
Section 4.1.1, Application (Preamble, Section-by-Section Analysis)
It addresses areas used only by employees as work areas, temporary structures, and general exceptions....
-
Section 4.1.1, Application (Section-By-Section Analysis and Response to Comments)
It addresses areas used only by employees as work areas, temporary structures, and general exceptions....
-
Key Differences Between Routes
Interior accessible routes may include corridors, floors, ramps, elevators, lifts, and clear floor space at fixtures....
-
Kitchens and Kitchenettes
Section 4.34.2 of the UFAS requires a clear turning space at least 60 inches in diameter or an equivalent T-shaped turning space in kitchens....
-
1133A.2.1, Item 3
All other kitchen designs shall provide a minimum clear width of at least 48 inches (1219 mm). (See Figure 11A-10A)....
-
§ 36.303(f)(2)
(2) A clear, sufficiently large, and sharply delineated picture of the interpreter's head and the participating individual's head, arms, hands, and fingers, regardless of his body position...
-
§ 35.160(d)(2)
(2) A clear, sufficiently large, and sharply delineated picture of the interpreter's head and the participating individual's head, arms, hands, and fingers, regardless of his body position...
-
11B-406.5.2 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum....
-
11B-406.5.2 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum....
