Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
Search Results "9-1-1 Service"
-
11B-504.4 Tread surface
-
DIRECTIONAL SIGN
[DSA-AC, HCD 1 & HCD 2]. A publicly displayed notice which indicates by use of words or symbols a recommended direction or route of travel....
-
802.1.1 Floor or Ground Surface
EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a of 1/2 inch (13 mm) under rated loading to zero loading conditions....
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum. Figure 505.5 Handrail Clearance...
-
407.4.3 Platform to Hoistway Clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
406.3 Sides of Curb Ramps
Where provided, curb ramp flares shall not be steeper than 1:10. Figure 406.3 Sides of Curb Ramps...
-
INVESTIGATION AND FINDINGS
The ADA prohibits discrimination on the basis of disability in the full and equal enjoyment of the goods, services, facilities, privileges, advantages, or accommodations by a public accommodation...
-
2. Executive Summary
for the accessibility standards adopted by DOJ for the design, construction, and alteration of facilities (other than certain transportation facilities) by entities subject to the ADA.9...
-
28 CFR Part 35 Nondiscrimination on the Basis of Disability in State and Local Government Services (2010 ADA Title II Regulations with amendments issued through Aug. 2016)
DEPARTMENT OF JUSTICE 28 CFR Part 35 [CRT Docket No. 105; AG Order No. 3180–2010] RIN 1190–AA46 Nondiscrimination on the Basis of Disability in State and Local Government Services...
-
4.2.4 Height of Fire-Building Surface
The fire-building surface within a fire ring shall be at least 9 inches (230 mm) above the floor or ground....
-
901.1 Scope
The provisions of Chapter 9 shall apply where required by Chapter 2 or where referenced by a requirement in this code....
-
11B-502.4 Floor or ground surfaces
Exception: Slopes not steeper than 1:48 shall be permitted. [2010 ADAS] Advisory 502.4 Floor or Ground Surfaces. ...
-
Section 4.1.6, Alterations (Preamble, Section-by-Section Analysis)
First, if any existing element or space is altered, the altered element or space must meet new construction requirements (section 4.1.6(1)(b))....
-
11B-502.4 Floor or ground surfaces
Exception: Slopes not steeper than 1:48 shall be permitted. [2010 ADAS] Advisory 502.4 Floor or Ground Surfaces. ...
-
11B-502.4 Floor or ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved. Advisory 11B-502.4 Floor or ground surfaces....
-
V. PROVIDING TECHNICAL ASSISTANCE
The ADA Information Line (1-800-514-0301/v; 1-800-514-0383/tty) assists callers in understanding the ADA and how it applies to a caller's specific situation, thereby assisting people with...
-
Introduction
Three Federal laws – the Individuals with Disabilities Education Act (IDEA),1 Title II of the Americans with Disabilities Act of 1990 (ADA) (Title II),2 and Section 504 of the Rehabilitation...
-
BACKGROUND
. § 12188(b)(1)(A)(i) and 28 C.F.R. § 36.502....
-
II. INVESTIGATION AND FINDINGS
Discrimination includes failing to take such steps as necessary to ensure that no individual with a disability is excluded, denied services, segregated, or otherwise treated differently...
-
Clarity Ensemble Amplified Captioned Telephone
ClearCaptions phone captioning service is funded by the U.S. government and provided for U.S. residents only....
-
11B-101.1 General
The requirements are to be applied during the design, construction, additions to, and alteration of sites, facilities, buildings, and elements to the extent required by Chapter 1, Section...
-
11B-101.1 General
The requirements are to be applied during the design, construction, additions to, and alteration of sites, facilities, buildings, and elements to the extent required by Chapter 1, Section...
