These requirements are to be applied to all areas of a facility unless exempted, or where scoping limits the number of multiple elements required to be accessible....
Search Results "State Requirement"
-
F201.1 Scope
-
Section 35.151(g) Assembly areas (Section-by-Section Analysis)
Two industry commenters—at least one of whom otherwise supported this rule—requested that the Department explicitly state that this rule does not apply retroactively to existing theaters...
-
11B-206.4.4 Transportation facilities
In addition to the requirements of Sections 11B-206.4.2, 11B-206.4.3, and 11B-206.4.5 through 11B-206.4.9, transportation facilities shall provide entrances in accordance with Section 11B...
-
[ADA Title III §36.104] 2010 Standards
[ADA Title III §36.104] 2010 Standards means the 2010 ADA Standards for Accessible Design, which consist of the 2004 ADAAG and the requirements contained in subpart D of this part....
-
11B-206.4.4 Transportation facilities
In addition to the requirements of Sections 11B-206.4.2, 11B-206.4.3, and 11B-206.4.5 through 11B-206.4.9, transportation facilities shall provide entrances in accordance with Section 11B...
-
Key Stations and Intercity Rail Stations: ADA Standard Section 206.4.4.3
Section 206.4.4.3 covers scoping requirements in the current ADA Standards for accessible routes to key stations and intercity rail stations at transportation facilities.
-
Visual Characters: ADA Standard Section 703.5
EXCEPTION: Where visual characters comply with 703.2 and are accompanied by braille complying with 703.3, they shall not be required to comply with 703.5.2 through 703.5.9....
-
General: ADA Standard Section 708.1
Devices that do not require handsets are easier to use by people who have a limited reach....
-
[ADA Title III §36.104] 2010 Standards
[ADA Title III §36.104] 2010 Standards means the 2010 ADA Standards for Accessible Design, which consist of the 2004 ADAAG and the requirements contained in subpart D of this part....
-
11B-809.10.7.5 Controls
The force required to activate controls shall be 5 pounds (22.2 mm) maximum....
-
11B-809.10.7.5 Controls
The force required to activate controls shall be 5 pounds (22.2 mm) maximum....
-
Sloped Entries: ADA Standard Section 1009.3.1
EXCEPTION: Where sloped entries are provided, the surfaces shall not be required to be slip resistant....
-
Hoistway Signage
Requirements for standard elevators require that the main entry level be labeled by a tactile star at the hoistway (407.2.3.1)....
- Viking Talk-A-Phones ETP-400V and ETP-400DV, Panel Phone E-1600A-TP-EWP
-
11B-406.5.3 Landings
Exception: Parallel curb ramps shall not be required to comply with Section 11B-406.5.3....
-
11B-406.5.3 Landings
Exception: Parallel curb ramps shall not be required to comply with Section 11B-406.5.3....
-
Kurt Knight: Development of VA Standards
It’s a requirement – a statutory requirement....
-
401.1 Scope
The requirements of Chapter 4 shall apply to ICT that is hardware where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced...
- Hager Companies 2300 Series Lever
-
6. Acquisition or Modification of Equipment and Devices
Where the job requires special adaptations of equipment, the employer and the applicant or employee should use the process described earlier (see 3.8) to identify the exact functional abilities...
-
Safety Assistants/Attendants
As stated in the preamble to the 1990 rule (see 55 FR 8031), the carrier can play an important role in selecting a safety assistant (e.g., a deadheading crew member, a passenger volunteer...
- Amendment of Americans With Disabilities Act Title II and Title III Regulations To Implement ADA Amendments Act of 2008
-
§ 36.211(c)
(c) If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the...