407.12.2 Side Reach (Section-by-Section Analysis) This section specifies proposed requirements for operable parts providing unobstructed or obstructed side reaches. It proposes to...
Search Results "Vertical Clearance"
Filters
Commonly Searched Documents
-
407.12.2 Side Reach (Section-by-Section Analysis)
-
Clearance: ADA Standard Section 608.2.2.1
Section 608.2.2.1 covers the current ADA Standards for the clearances of standard roll-in type shower compartments.
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm. Figure 304.3.2 T-Shaped Turning Space...
-
408.4.3 Platform to Hoistway Clearance
408.4.3 Platform to Hoistway Clearance. The platform to hoistway clearance shall comply with 407.4.3....
-
404.2.4.1 Swinging Doors and Gates
Swinging doors and gates shall have maneuvering clearances complying with Table 404.2.4.1....
-
11B-606.7 Sink depth
Where a forward approach is required at a sink, knee and toe clearance shall be provided in compliance with Section 11B-306....
-
305.7 Maneuvering Clearance
305.7 Maneuvering Clearance....
-
H8
If lavatories are provided, does at least one have at least a 29 inch high clearance under the front apron with the top of the rim no more than 34 inches above the floor?...
-
Resting Intervals [1017.8]
The vertical alignment of the trail tread, turning space, and resting interval must be nominally planar so that all the wheels of a mobility device touch the ground when turning into and...
-
408.4.3 Platform to Hoistway Clearance
The platform to hoistway clearance shall comply with 407.4.3....
-
408.4.3 Platform to Hoistway Clearance
The platform to hoistway clearance shall comply with 407.4.3....
-
11B-1003.3 Clearances
Clearances at boat slips and on boarding piers at boat launch ramps shall comply with Section 11B-1003.3. [2010 ADAS] Advisory 1003.3 Clearances. ...
-
11B-1003.3 Clearances
Clearances at boat slips and on boarding piers at boat launch ramps shall comply with Section 11B-1003.3. [2010 ADAS] Advisory 1003.3 Clearances....
-
11B-1003.3 Clearances
Clearances at boat slips and on boarding piers at boat launch ramps shall comply with Section 11B-1003.3. Advisory 11B-1003.3 Clearances....
-
4.32.3 Knee Clearances
If seating for people in wheelchairs is provided at tables or counters, knee spaces at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided (see...
-
4.32.3 KNEE CLEARANCES
If seating for people in wheelchairs is provided at tables, counters, and work surfaces, knee spaces at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall...
-
1132A.5.2 Strike edge maneuvering space at doors
Twenty-four inches (610 mm) is preferred for strike edge clearance. ...
-
1132A.5.2 Strike edge maneuvering space at doors
Twenty-four inches (610 mm) is preferred for strike edge clearance....
-
11B-809.10.4 Sufficient maneuvering space
The clear maneuvering space shall be permitted to include knee and toe clearance under bathroom fixtures....
-
1132A.5.2 Strike edge maneuvering space at doors
Twenty-four inches (610 mm) is preferred for strike edge clearance....
-
§ 38.93(d)(1) Requirements
Vertical alignment may be accomplished by car air suspension, platform lifts or other devices, or any combination....
-
Clearance: ADA Standard Section 604.9.2
Section 604.9.2 covers the current ADA Standards for clearances around children's use water closets.
-
Knee and Toe Space Depth
[See subsections ...]
-
McGuire Manufacturing Co., Inc. 1149WC: Offset with 149 Flat Grid Strainer
Offset sink strainer with chrome plated flat grid wrought brass strainer 1 3/4" x 2 15/16" OD.
