Sales and ticket counters that have been lowered to provide access must be clear and unobstructed for use by people with disabilities....
Search Results "POS: Point-of-Sale Device"
Commonly Searched Documents
-
Maintaining Accessibility in Museum Shops
-
Clear Floor or Ground Space: ADA Standard Section 1002.6.1
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the transfer device....
-
11B-1002.6.1 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device....
-
Amusement Rides: ADA Standard Section 206.2.9
Section 206.2.9 covers scoping requirements in the most current ADA Standards for accessible routes in amusement rides.
-
11B-206.2.9 Amusement rides
Amusement rides required to comply with Section 11B-234 shall provide accessible routes in accordance with Section 11B-206.2.9. Accessible routes serving amusement rides shall comply...
-
Must elevator doors remain open for 20 seconds?
Reopening devices must remain effective for 20 seconds minimum, but in reopening, doors do not have to remain open for this length of time if unobstructed....
-
Tips for Communicating with Individuals with Mobility Impairments
Do not lean on a wheelchair or any other assistive device. Never patronize people who use wheelchairs by patting them on the head or shoulder....
-
4.1.3. Ongoing Costs
As detailed in Section 3.6.2, a portion of the required captioning devices are replaced every year and make up the majority of the equipment replacement costs in the primary analysis ($26.6...
-
2.4.3. Maintenance and Administrative Costs
The maintenance and administrative costs include, but are not limited to: Periodic ongoing maintenance, system testing, and cleaning of devices – Under heavy use from patrons, movie...
-
Credible Assurance
Credible Assurance An entity that determines it can accommodate one or more types of OPDMDs in its facility is allowed to ask the person using the device to provide credible assurance...
-
7.2(2)(iii)
All accessible sales and service counters shall be on an accessible route complying with 4.3....
-
Can the carrier limit the amount of money they pay me for this claim...as they currently may for domestic baggage claims?
On claims involving damage to assistive devices on domestic flights, carriers may not invoke the liability limit applicable to baggage claims....
- Pager Receiver (BE1230)
- Variety Freedom Program
-
3.6.1. Hardware Replacement
Within this replacement schedule, it is likely that more equipment will need replacement near the mid-point of the replacement time frame (as opposed to “earlier” or “later” years). ...
-
Transfer Height
Transfer Height The height of the transfer device must be between 14 and 24 inches above the load and unload area surface....
-
3.0 Comparison of Research Methodologies
Device dimensions were defined clearly. Although a wide variety of accessories were observed on the devices, they were not measured as part of the width calculation....
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided. Knee and toe space complying with Section 11B-306...
-
904.4.2 Forward Approach
A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided. Knee and toe space complying with 306 shall be...
-
904.4.2 Forward Approach
A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided. Knee and toe space complying with 306 shall be...
-
904.4.2 Forward Approach
904.4.2 Forward Approach. A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided. Knee and toe space complying...
-
10.4.1(3)
(3) Ticketing areas shall permit persons with disabilities to obtain a ticket and check baggage and shall comply with 7.2.
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided. Knee and toe space complying with Section 11B-306...
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided. Knee and toe space complying with Section 11B-306...