Floor surfaces in platform lifts shall comply with 302 and 303....
Search Results "Overhead Track Patient Lift"
Filters
Commonly Searched Documents
-
410.2 Floor Surfaces
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
§ 38.83(b)(11) Boarding direction
The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids....
-
§ 38.23(b)(11) Boarding direction
The lift shall permit both inboard and outboard facing of wheelchair and mobility aid users....
-
5.4.4.1 Transfer Support Distance from Transfer Surface Recommendation for Stretchers
The horizontal distance from transfer surface should be no more than 3 inches from the edge of the patient support surface....
-
Clear Deck Space
Clear Deck Space Clear deck space must be provided to enable a person to get close enough to the pool lift seat to easily transfer from a wheelchair or mobility device....
-
5.2.1.4 Transfer Surface Size for Imaging Equipment
The transfer surface should be located such that the long dimension of 28 inches is located parallel to the patient scanning/imaging side of the table....
-
11B-705.1.1.3 Color and Contrast
Detectable warning surfaces at transit boarding platform edges, bus stops, hazardous vehicular areas, reflecting pools, and track crossings shall comply with Section 11B-705.1.1.3.1....
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
M301.3.1 Transfer Supports
patient monitoring, etc....
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
M304.1 General
Diagnostic equipment used by patients in a standing position shall comply with M304....
-
5.9 Standing Support for Equipment Used by Patients in a Standing Position
5.9 Standing Support for Equipment Used by Patients in a Standing Position....
-
1009.2.6 Footrests and Armrests
EXCEPTION: Footrests shall not be required on pool lifts provided in spas....
-
1009.2.6 Footrests and Armrests
EXCEPTION: Footrests shall not be required on pool lifts provided in spas....
-
Harmar CPL800H-1400H Hydraulic CPL with Modular Tower
Easy-install modular panels adapt 4' to 14' lifting height. Amazingly quiet and smooth hydraulic operation....
-
Section 37.165 Lift and Securement Use
A lift conforming to Access Board requirements has a platform measuring at least 30” x 48”, with a design load of at least 600 pounds (i.e., capable of lifting a wheelchair/occupant combination...
-
1009.2.6 Footrests and Armrests
EXCEPTION: Footrests shall not be required on pool lifts provided in spas....
-
16. I think a lift poses a safety risk at an unattended pool. I also have heard that my insurance rates will increase if I have a lift in my unattended pool. Can I consider safety risks?
I think a lift poses a safety risk at an unattended pool. I also have heard that my insurance rates will increase if I have a lift in my unattended pool....
-
Platform to Runway Clearance: ADA Standard Section 410.4
Section 410.4 covers the current ADA Standards for the required clearance between the platform and any runway landing.
-
Seat Location: ADA Standard Section 1009.2.2
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool. The deck surface between the centerline of...
