The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible...
Search Results "Safety Requirement"
Filters
Commonly Searched Documents
-
604.3.2 Overlap
-
Accessible Routes within a Building or Facility
In alterations and additions, an accessible route is required where circulation paths are altered or built (§202.3). ...
-
Section 37.81 Purchase or Lease of Used Rail Vehicles by Public Entities Operating Rapid or Light Rail Systems
Section 37.81 Purchase or Lease of Used Rail Vehicles by Public Entities Operating Rapid or Light Rail Systems This section lays out the requirements for a public entity acquiring a used...
-
§ 38.51(c)
Removal of seats is not required....
-
11B-812.7.2 Marking
The blue color required for identification of access aisles for accessible parking shall not be used. Access aisle markings may extend beyond the minimum required length....
-
11B-215.5 Residential facilities
Where provided in residential dwelling units required to comply with Section 11B-809.5, fire alarms shall comply with Chapter 9, Section 907.5.2.3.3 and carbon monoxide alarms shall comply...
-
502.5 Vertical Clearance
in the imposition of any additional requirements of such ordinances, the structure may exceed the height limitation specified in those particular codes as necessary to comply with the requirements...
-
11B-208.2 Minimum number
Parking spaces complying with Section 11B-502 shall be provided in accordance with Table 11B-208.2 except as required by Sections 11B-208.2.1, 11B-208.2.2, and 11B-208.2.3....
-
232 Detention and Correctional Facilities
location (604.5) Scoping provisions for detention and correctional facilities require access to at least 2% of the general housing and holding cells provided (232.2.1)....
-
Issue: "Grandfather" Clause or Small Entity Exemption
Requirement: There is no “grandfather” clause in the ADA. However, the law is flexible....
-
11B-219.3 Receivers
Where a building contains more than one assembly area and the assembly areas required to provide assistive listening systems are under one management, the total number of required receivers...
-
E.2. - Where an agency uses a best value "trade-off" source selection process, may it trade off applicable technical provisions of the Access Board’s standards where an offer provides strong technical merit, strong past performance, or a lower price?
The Access Board’s technical provisions are mandatory requirements that must be met (directly or through equivalent facilitation) unless (a) the product or service (if it is a commercial...
-
B. Patient Protection and Affordable Care Act and Section 510 of the Rehabilitation Act
Section 510 of the Rehabilitation Act requires the standards to be issued not later than 24 months after the enactment of the Patient Protection and Affordable Care Act....
-
Introduction
The ADA requires that new construction and alterations to existing facilities comply with the ADA Standards for Accessible Design 1 (Standards)....
-
11B-208.2 Minimum number
Parking spaces complying with Section 11B-502 shall be provided in accordance with Table 11B-208.2 except as required by Sections 11B-208.2.1, 11B-208.2.2, and 11B-208.2.3....
-
11B-219.3 Receivers
Where a building contains more than one assembly area and the assembly areas required to provide assistive listening systems are under one management, the total number of required receivers...
-
11B-219.3 Receivers
Exceptions: Where a building contains more than one assembly area and the assembly areas required to provide assistive listening systems are under one management, the total number...
-
General: ADA Standard Section 404.1
Section 404.1 of the ADA Standards covers information in the current ADA Standards for doors, doorways, and gates that are part of an accessible route.
-
Check-Out Aisles: ADA Standard Section 216.11
Section 216.11 covers scoping requirements in the current ADA Standards for signs at check-out aisles.
-
11B-403.5.2 Clear width at turn
Exception: Where the clear width at the turn is 60 inches (1524 mm) minimum compliance with Section 11B-403.5.2 shall not be required....
-
11B-407.4.7.2 Keypads
ETA Editor's Note The preceding CBC requirements for elevator controls at 11B-407.4.6 and 11B-407.4.7 are more stringent than those of 2010 ADA Standards....
-
11B-411.2.1.1 Location
Exception: Hall call consoles beyond those required by Section 11B-411.2.1.1 shall be permitted to be provided outside the elevator landing and to be wall-mounted, pedestal-mounted, or mounted...
-
11B-216.4.1 Exit doors
Signs required by Chapter 10, Section 1013.4 at doors to exit passageways, exit discharge, and exit stairways shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5....
-
11B-1009.3.2 Submerged depth
Where landings are required by Section 11B-405.7, at least one landing shall be located 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....