At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition...
Search Results "Clear Floor Area"
-
11B-604.8.1.4 Toe clearance
-
Primary Function
Areas that contain a primary function include, but are not limited to, [the customer services lobby of a bank, 36.403(b)], the dining area of a cafeteria, the meeting rooms in a conference...
- Activar JL Industries Academy Series 1027V10 Aluminum Fire Extinguisher Cabinet
-
11B-407.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
11B-407.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
Executive Summary
Key requirements apply to clear floor area, knee and toe clearances, maneuvering clearances, reach limits, grip force requirements and door usability factors....
- LaCantina Aluminum Thermally Controlled Slider System
-
R210.3 Shared Use Paths
require objects along or overhanging any portion of a pedestrian circulation path to comply with the proposed technical provisions for protruding objects in R402 and to not reduce the clear...
- Accessible Pittsburgh: Accessible Trails
-
11B-244.1 General
Religious practice may restrict general access to specific areas, for example a raised altar area; however access for persons with disabilities to these areas may be required....
-
11B-244.1 General
Religious practice may restrict general access to specific areas, for example a raised altar area; however access for persons with disabilities to these areas may be required....
-
1009.2.1 Elevators required
In buildings where a required accessible floor is four or more stories above or below a level of exit discharge or where an accessible occupiable roof is above a story that is three or more...
-
11B-224.8.2 More than 50-bed facilities
In sleeping rooms with more than 25 beds covered by this part, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3 of the 2010 Standards....
-
11B-224.8.2 More than 50-bed facilities
In sleeping rooms with more than 25 beds covered by this part, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3 of the 2010 Standards....
-
Protruding Objects [4.4]
The touch technique involves arcing the cane side-to-side to detect points beyond both shoulders and is often used in uncontrolled areas....
-
Alterations [4.1.6(1), (2)]
For example, if the work is limited to specific elements, such as replacement of a lavatory and floor coverings, then at a minimum each altered element must comply with ADAAG....
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
- Hearing Loop Systems T-Coil System
-
"Wheelchair" (Section-by-Section Analysis)
mobility-impaired person for locomotion, that is suitable for use in an indoor pedestrian area." 42 U.S.C. 12207(c)(2). ...
-
"Wheelchair" (Section-by-Section Analysis)
mobility-impaired person for locomotion, that is suitable for use in an indoor pedestrian area." 42 U.S.C. 12207(c)(2). ...
-
809 Residential Dwelling Units
Kitchen 809.4 Toilet Facilities and Bathing Facilities 809.2 Residential Dwelling Units with Mobility Features 809.2.1 Accessible Routes 809.2.1.1 Location 809.2.1.2 Floor...
-
New Construction and Alterations
If you build a new facility or modify your existing one, (for example, work such as restriping the parking area, replacing the entry door or renovating the sales counter), make sure to consult...
-
711.4.2 Membrane penetrations
Where floor/ceiling assemblies are required to have a minimum 1-hour fire-resistance rating, recessed fixtures shall be installed such that the required fire resistance will not be reduced...
