Each combination of charging level (such as: AC Level 1, AC Level 2, DC Fast Charge) and EV connector type shall be considered as a facility....
Search Results "Enhanced 9-1-1"
-
11B-228.3.2 Minimum number
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
11B-404.2.10 Door and gate surfaces
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other and be free of sharp or abrasive edges....
-
11B-703.3.1 Dimensions and capitalization
0.025 (0.6 mm) to 0.037 (0.9 mm) Distance between corresponding dots from one cell directly below1 0.395 (10 mm) to 0.400 (10.2 mm) 1....
-
Issue 5: Tactile arrow (in line)
Issue 5: Tactile arrow (in line) Figure 9: Tactile arrow not aligned with crosswalk direction....
-
Signatures and Contact Information Page
FOR HUMBOLDT COUNTY BOARD OF SUPERVISORS: /s/ Mark Lovelace MARK LOVELACE Chair Humboldt County Board of Supervisors Date 8/9/16 FOR THE UNITED STATES OF AMERICA:...
-
¼ Inch Minus Limestone
August 9, 2007. Quarter Inch Minus Limestone trail segment as second lift is rolled and compacted. August 9, 2007....
-
11B-604.8.1.4 Toe clearance
At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition...
-
11B-604.8.1.4 Toe clearance
At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition...
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
-
11B-407.2.2.3 Audible signals
Exceptions: 1. Reserved. 2. Reserved. [2010 ADAS] 2. ...
-
1007.2.1 Elevators required
Exceptions: 1. ...
-
Section 36.202 Activities (Preamble, Section-by-Section Analysis)
In addition, the language of Sec.36.202 very closely tracks the language of section 302(b)(1)(A) of the Act, and that statutory provision does not expressly contain these limitations....
-
What is a "disability-related inquiry"?
(Question 1) A "disability-related inquiry" is a question that is likely to elicit information about a disability, such as asking employees about: whether they have or ever had a disability...
-
1003.1 Applicability
(DSA-AC & HCD 1-AC) In addition to the requirement of this chapter, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required...
-
1008.2.4.2 Elevated
EXCEPTIONS: 1....
-
604.4 Seats
EXCEPTIONS: 1....
-
1.1.12 Validity
ETA Editor's Note Sections from California Building Code Chapter 1 not adopted by Division of the State Architect - Access Compliance (DSA-AC) omitted....
-
Appropriate clear floor space
Appropriate clear floor space (shown by dashed lines) is needed adjacent to each cell feature (see page 1 diagrams on clear floor space)....
-
Ceiling Mounted Lifts
Assisted Transfer with Ceiling Mounted Overhead Track Lift 1. Ceiling structure must support weight of lift and person 2....
-
11B-221.2.1.5 Stadium-style movie theaters
The required wheelchair spaces shall be located on risers or cross-aisles in the stadium section that satisfy at least one of the following criteria: 1. ...
-
Parallel Approach to Kitchen Sinks
consistent with the ANSI A117.1 standard, that allows a complying parallel approach to kitchen sinks in spaces where a cook top or conventional range is not provided (606.2, Exception 1)...
-
M303.2.6 Edge Protection (Section-by-Section Analysis)
(Significant Changes – Edge Protection), the final rule requires platforms with wheelchair spaces that are raised more than 1½ inches in height to provide a minimum 2-inch-high edge protection...