Section 102 of the ADA Standards covers information on the dimensions for adults and children.
Search Results "Water Depth"
Filters
Commonly Searched Documents
-
Dimensions for Adults and Children: ADA Standard Section 102
-
11B-102 Dimensions for adults and children
In addition, this chapter includes technical requirements based on children’s dimensions and anthropometrics for drinking fountains, water closets, toilet compartments, lavatories and sinks...
-
604.8.1.5 Grab Bars
A side-wall grab bar complying with 604.5.1 shall be provided and shall be located on the wall closest to the water closet....
-
Position of Grab Bars: ADA Standard Section 609.4
Section 609.4 covers the current ADA Standards for the position of grab bars.
-
Boost Your Business - Chapter 10 - Restroom Fixtures
Boost Your Business - Chapter 10 - Restroom Fixtures
-
6. Clear floor space
6. Clear floor space: Adequate space is provided to approach the toilet from a variety of wheelchair transfer positions (i.e. diagonal or side approaches). Generally, the toilet...
-
4. Toilet seat height
4. Toilet seat height: The toilet seat needs to be from 17 to 19 inches above the floor to permit transfers to and from wheelchairs.
-
Note
Note: In every instance, regardless of toilet and lavatory configuration, adequate space needs to be provided for inmates who use wheelchairs to transfer onto and off of the...
-
M8
M8. Is there at least 18 inches between the center of the toilet and the side of the adjacent lavatory? [ADA Standards § 4.16.2; Fig. 28] Yes No
-
4.15.4 Controls
Controls shall comply with 4.27.4. Unit controls shall be front mounted or side mounted near the front edge.
-
Controls [4.15.4]
Controls [4.15.4] Controls must be operable with one hand and not require tight grasping, pinching, or twisting of the wrist to operate. Push bars are easier to use by a broader...
-
A4.16.3 Height
Height preferences for toilet seats vary considerably among disabled people. Higher seat heights may be an advantage to some ambulatory disabled people, but are often a disadvantage...
-
A4.16.3 HEIGHT
Preferences for toilet seat heights vary considerably among disabled people. Higher seat heights may be an advantage to some ambulatory disabled people but a disadvantage for...
-
4.15.4 CONTROLS
Controls shall comply with 4.27.4. Unit controls shall be front mounted or side mounted near the front edge.
-
5.3.3.1 Height
The total height of the toilet seat on the riser for a pit toilet shall be between 17 inches (430 mm) and 19 inches (485 mm) above the floor or ground surface.
-
Length
Length. Whereas none of the respondents specifically addressed the issue of grab bar length, drawings submitted clearly indicate that many of the alternate swing away grab bars were...
-
Offset Flange
For floor mounted water closets, we have suggested the use of an offset waste flange to shift the centerline. ...
-
11B-609.4 Position of grab bars
shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water...
-
11B-604.3.1 Size
Clearance around a water closet shall be 60 inches (1524 mm) minimum measured perpendicular from the side wall and 56 inches (1422 mm) minimum measured perpendicular from the rear wall....
-
4.17.3* Size and Arrangement
Standard toilet stalls with a minimum depth of 56 in (1420 mm) (see Fig. 30(a)) shall have wall-mounted water closets....
-
604.5.1 Side Wall
Figure 604.5.1 Side Wall Grab Bar at Water Closets...
-
11B-602.3 Operable parts
The flow of water shall be activated by a manually operated system that is front mounted or side mounted and located within 6 inches (152 mm) of the front edge of the fountain or an automatic...
-
604.5.1 Side Wall
[ECTCR UFAS 4.17.6, Fig. 30(a), Fig. 30(d)] Figure 604.5.1 Side Wall Grab Bar at Water Closets...
-
Spout Location [4.15.3]
The trajectory of water flow must be vertically "parallel" or "nearly parallel" to the face of the unit....
