High resolution VMS characters have vertical pixel counts of 16 rows or greater. Low resolution VMS characters have vertical pixel counts of 7 to 15 rows....
Search Results "Vertical Reference Plane"
Commonly Searched Documents
-
VARIABLE MESSAGE SIGN (VMS) CHARACTERS
-
Model Building Codes and Industry Standards
For technical provisions, the IBC references a consensus standard developed through the American National Standards Institute (the ANSI A117.1 standard), which is highly consistent with...
-
1016.8.4 Turning Space
The vertical alignment of the outdoor recreation access route, turning space, and resting interval is required to be nominally planar (i.e., as flat as possible) so that all the wheels of...
-
Accidental cueing of the audio
A few participants suggested that a physical barrier of some nature between each model would be helpful so you wouldn’t accidently cue the audio of the adjacent model while examining a plane...
-
Size
Participants were hearing about the differences of the planes as well as feeling it. The audio also helped explain why there were differences....
-
Delayed start and forewarning for the audio
A possible solution would be to have an audio attract which says, “please touch the plane for audio” in addition to signage....
-
Road Roughness Measurements
plane for measuring deviations....
-
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND PALACE SPORTS AND ENTERTAINMENT, LLC, REGARDING THE PALACE OF AUBURN HILLS
[See subsections ...]
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the horizontal...
-
§382.7(b)
The passenger gets off the plane in Frankfurt and boards a connecting flight (with a different flight number), on the same foreign carrier or a different carrier, which goes to Prague....
-
Passing Spaces [1017.4]
the base and the arms of the T-shaped space extend a minimum of 48 inches beyond the intersection (figure 6) Where the intersection of two trails serves as a passing space, the vertical...
-
Maneuvering Clearances at Doors [4.13.6]
Clearance to the wall plane next to the door (even when the door is in a recess) is essential....
- AJW Architectural Products U156 32 oz. Vertical Soap Dispenser - Surface Mounted
- Bradley Aerix+ High Speed, Stainless Steel Vertical Dual-Sided Hand Dryer
- Sargent AD8600 & NB-AD8600 Concealed Vertical Rod Exit Device for Aluminum Doors
- Sargent AD8400 & NB-AD8400 Narrow Stile Concealed Vertical Rod Exit Device
-
11B-903.6 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
Surfaces (R302.7) (Section-by-Section Analysis)
Grade breaks (i.e., the line where two surface planes with different grades meet, see R105.5) must be flush....
- Allegion Von Duprin 98/99 Series Von Duprin CVC Traditional Bottom Latch Adjustment
-
4.3.4 Knee and Toe Clearances
For example, the ADA-ABA has a sloped line indicating the depth of knee clearance at the plane of the knees and the depth somewhere above the ankles....
-
1.1.7.3.1 Detached one- and two-family dwellings
Detached one- and two-family dwellings, lodging houses, live/work units, townhouses not more than three stories above grade plane in height with a separate means of egress, and their accessory...
-
11B-221.2.1.5 Stadium-style movie theaters
satisfy at least one of the following criteria: Located within the rear 60 percent of the seats provided in the theater; or Located within the area of the theater in which the vertical...
-
1015.3 Height
Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: From the adjacent walking surfaces....