Abdomen depth (AD) 2. Footrest clearance height and depth...
Search Results "Urinal Depth"
Commonly Searched Documents
-
Introduction
-
Ambulatory Accessible Toilet Compartments
Section 213.3.1 of the 2010 Standards requires multi-user men’s toilet rooms, where the total of toilet compartments and urinals is six or more, to contain at least one ambulatory accessible...
-
Transfer Surface Size – M302.2.2 Seated Position
Transfer Surface Size – M302.2.2 Seated Position The issue of seat depth was discussed and decided during the full committee meetings as follows: depth of 17 inches minimum....
-
11B-1005.2.1.1 Dispersion
Different fishing locations may provide varying water depths, shade (at certain times of the day), vegetation, and proximity to the shoreline or bank. ◼...
-
407.12.3.2.1 Height (Section-by-Section Analysis)
Section-by-Section Analysis) This section, presented in tabular form (Table 407.12.3.2.1), proposes alternative maximum heights for operable parts with obstructed forward reaches depending on reach depth...
-
11B-603.6 Guest room toilet and bathing rooms
provide all toilet and bathing fixtures in a location that allows a person using a wheelchair measuring 30 inches by 48 inches (762 mm by 1219 mm) to touch the wheelchair to any lavatory, urinal...
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
Bathtub Seats: ADA Standard Section 610.2
Section 610.2 covers the current ADA Standards for bathtub seats.
-
11B-610.2 Bathtub seats
The depth of a removable in-tub seat shall be 15 inches (381 mm) minimum and 16 inches (406 mm) maximum. The seat shall be capable of secure placement....
-
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302 Description: The transfer surface size standard has two components: width and depth....
-
Chapter 6: Plumbing Elements and Facilities
Chapter 6 provides criteria for drinking fountains (602), toilet and bathing rooms (603), water closets and toilet compartments (604), urinals (605), lavatories and sinks (606), bathtubs...
-
5.4.1.2 Transfer and Positioning Support Location for Imaging Equipment
Transfer supports should be provided for imaging equipment with transfer surfaces with depths of less than or equal to 24 inches....
-
Can maneuvering for a forward approach be provided when there is space at least 60” deep in front of a door?
Space at least 60” deep in front of a door that is unobstructed on approach sides will provide sufficient depth for a forward approach if appropriate strike-side clearance is provided; but...
-
2.2.2 Structural Anthropometry (i.e. Body and WhMD Dimensions)
Length/Depth: Clearance Depth for tables, trays, etc....
-
COST OF EQUIPMENT
Increase Configuration #1: Accessible equipment as currently available on the market, standard chair arms and stirrups 19 inch max. height 28 inch width 17 inch depth...
-
408.4.1 Car Dimensions and Doors
Elevator cars shall provide a clear width 42 inches (1065 mm) minimum and a clear depth 54 inches (1370 mm) minimum....
-
407.8.3.2.2 Knee and Toe Space under ICT with Obstructed Forward Reach
Toe space shall be permitted to provide a clear height of 9 inches (230 mm) minimum above the floor and a clear depth of 6 inches (150 mm) maximum from the vertical reference plane toward...
-
Re: Single User Restroom Accessibility
If only one of the toilet rooms is to be accessible and only one has a urinal, the toilet room with the urinal should be the accessible toilet room....
-
5.8.2 Knee and Toe Clearance Recommendations under Breast Platform Recommendations
The proposed provision requires the depth of wheelchair spaces to include knee and toe clearance....
-
11B-809.10.7.1 Floor space
be reduced to 36 inches (914 mm) minimum for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a water closet which extend 24 inches (610 mm) maximum in depth...
-
408.4.1 Car Dimensions and Doors
Elevator cars shall provide a clear width 42 inches (1065 mm) minimum and a clear depth 54 inches (1370 mm) minimum....
-
MEASUREMENT TECHNIQUE
MEASUREMENT TECHNIQUE The depth and width are measured along the centerlines of the seat, and the height from the floor to the highest point of the transfer surface: The depth...
-
5.8.2.7 Base Support Allowance
An additional sloped region above the base support is permitted at a depth of 25 inches from the front edge of the breast platform at 1½ inches above the floor, and can extend to a height...
-
4.3.4 Knee and Toe Clearances
For example, the ADA-ABA has a sloped line indicating the depth of knee clearance at the plane of the knees and the depth somewhere above the ankles....