One commenter (medical association) noted that it would be difficult to meet the six-inch clearance from the floor when the table is lowered to 17 inches to allow for transfer....
Search Results "Procedure Table"
Commonly Searched Documents
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
-
11B-703.5.6 Height from finish floor or ground
Where provided, floor plans providing emergency procedures information in accordance with Title 19 shall not be required to comply with Section 11B-703.5.6....
-
11B-813.2.1.2 Clearance
A 36 inches minimum (914 mm) width side clearance shall be provided along the entire length of one side of adult changing tables....
-
Sample Documents
Editor's Note The following link points to the documents referenced above: http://www.adaactionguide.org/resources#sampledocuments Grievance Procedure - long and short versions...
-
Card Catalogs and Magazine Displays [8.4]
Requirements for fixed counters and tables [4.32] specify a surface height (34 inches maximum) and knee clearance below appropriate for extended use as a writing/work surface....
-
Crisis Response
Crisis Response: Through settlement agreements with the Department, police departments in Portland and Seattle trained additional officers to serve on Crisis Intervention Teams...
-
§ 37.209 Training and other requirements
OTRB operators shall comply with the requirements of §§37.161, 37.165-37.167, and 37.173. For purposes of §37.173, "training to proficiency" is deemed to include, as appropriate...
-
Spy City Café
Where fixed tables are provided at least 5% but not less than one of the fixed tables shall be accessible. See Standards § 5.1....
-
II-8.2000 Self-evaluation
In addition, a public entity should have policies that ensure that its equipment is maintained in operable working order. 5) A review should be made of the procedures to evacuate individuals...
-
11B-813.2.10 Door swing
within the room beyond the arc of the door swing, doors shall be permitted to swing into the clear floor space, clearance required for any fixture, and clearance required for adult changing tables...
-
5.3.2 Transfer Sides Recommendations for M301
., foot of an examination table)....
- TSA Cares: Special Procedures - Disabilities & Medical
-
M301.4.1 Clearance in Base
The base of diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep...
-
Figure M2: M301.4 Lift Compatibility
(at Diagnostic Equipment for Use by a Patient in a Supine, Prone, or Side-Lying Position)
-
M301.4.1 Clearance in Base
The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
B. Survey and Review of Polling Place Locations
Harris County shall revise its policies, practices, and procedures to select facilities to be used as polling places that do not exclude qualified individuals with disabilities from...
- Feeling Safe, Being Safe Webcast Training: Community Supports
- Widgit First Response Communication Book
- Living Earth Crafts Cloud 9 Spa Treatment Table
-
M305.5 Head and Back Support (Section-by-Section Analysis)
One manufacturer asserted that this requirement was ambiguous and that he had to read it multiple times to understand it; however, this commenter also indicated that the tables it currently...
-
Clear Floor and Turning Space Inside Examination Rooms
The exam table must have sufficient clear floor space next to it so that an individual using a wheelchair can approach the side of the table for transfer onto it....
-
M305.4 Leg Supports (Section-by-Section Analysis)
The MDE Advisory Committee agreed that, for procedures that use stirrups and require the leg to be stable, there must be a method to support the patient’s legs....
- Widgit First Response Communication Book
-
§ 35.130 General prohibitions against discrimination
* * * * * (b) * * * (7)(i) A public entity shall make reasonable modifications in policies, practices, or procedures when the modifications are necessary to avoid discrimination...