Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor. Where towel bars are provided they shall be...
Search Results "Exam Room"
-
11B-809.10.8.7 Mirrors and towel bars
-
11B-809.10.8.6 Controls
Faucet controls and operating mechanisms shall comply with Section 11B-309.4.
-
11B-805.2.2 Beds
A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of the beds. [2010 ADA Standards] 805.3 Clear Floor or Ground Space. A clear floor...
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
803.2 Turning Space
Turning space complying with 304 shall be provided within the room....
-
§104.23(c)(2)
(2) For purposes of this section, section 4.1.6(1)(g) of UFAS shall be interpreted to exempt from the requirements of UFAS only mechanical rooms and other spaces that, because of their intended...
-
Accessible Medical Equipment
For participants with mobility limitations, we use exam and procedural tables and chairs that: [See Resources below and Section H] D.1....
-
Communication Features in Guest Rooms
Guest rooms required to have accessible communication features are required to have visual alarms....
-
M305.2.8 Fittings
Transfer supports shall not rotate within their fittings when in place for transfer.
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum.
-
M305.2.7 Clearance (Section-by-Section Analysis)
In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support. However, in the preamble to the MDE NPRM the Access Board...
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
5.4.10 Transfer Support Fittings Recommendations for M301 and M302 Description: To ensure safe and effective transfers, transfer supports must not rotate within their fittings...
-
5.4.10 Transfer Support Fittings for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.10 Transfer Support Fittings for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position. The transfer supports shall not rotate when locked in place for patient...
-
M305.2.3 Fittings
Transfer supports shall not rotate within their fittings.
-
Coat Hooks and Shelves: ADA Standard Section 213.3.7
Section 213.3.7 covers scoping requirements in the current ADA Standards for coat hooks and shelves
-
Feature 5 - Temporary Barrier Removal for Meeting Space
Feature 5 - Temporary Barrier Removal for Meeting Space
-
AD Systems’ Patient Restrooms
or bariatric needs within the tight space dedicated to these rooms’ facilities....
-
Scoping for Guest Rooms
These levels slightly differ from the original ADAAG at the higher levels (401 rooms and above)....
-
224 and 806 Transient Lodging Guest Rooms
[See subsections ...]
-
11B-806 TRANSIENT LODGING GUEST ROOMS
[See subsections ...]
-
11B-806 Transient lodging guest rooms
[See subsections ...]
-
11B-806 Transient lodging guest rooms
[See subsections ...]
