The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements. ...
Search Results "Functional Area"
Commonly Searched Documents
- Allegion LCN 2010 Series Overhead Concealed Door Control
- Sargent 7800 Mortise Lock with Push/Pull Trim Hardware
- Falcon Waterfree Technologies Vitreous China Urinal F-4000
- American Standard Jetbrook Urinal
- TownSteel FCE4010 Cylindrical Lockdown Rigid Trim
- TownSteel FCE4020 Cylindrical Lockdown Clutched Trim RFID Cylindrical
- TownSteel XME9010 Mortise Lockdown Rigid Trim Keypad Mortise
-
806.2.4 Toilet and Bathing Facilities
Toilet and bathing fixtures required to comply with 603 through 610 shall be permitted to be located in more than one toilet or bathing area, provided that travel between fixtures does not...
-
Section 1630.1(a) Purpose
plays a central role in enforcing the standards articulated in the ADA on behalf of individuals with disabilities; and to invoke the sweep of congressional authority to address the major areas...
-
Check Optional Features, if available
crosswalk during the following pedestrian phase (FDW), and walk across the street during the pedestrian phase and evaluate placement and aiming of devices for providing sound in the crosswalk area...
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
Accessible Routes
must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space,head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
-
Transfer Height
Transfer Height The height of the transfer device must be between 14 and 24 inches above the load and unload area surface....
-
Outdoor Constructed Features Along Trails [F247.5]
provided along a trail, at least 20 percent, but no less than one, of each type of element provided at each location on the trail (other than within camping and picnic facilities and viewing areas...
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
c-ii
Yes No If Yes, and the elevator or lift is part of the accessible route to a shelter area, is back-up electrical power available to operate the elevator or lift for the duration...
-
12101(a)(3)
(3) discrimination against individuals with disabilities persists in such critical areas as employment, housing, public accommodations, education, transportation, communication, recreation...
-
Pit Toilet
A pit toilet may be permanently installed or may be moved from one location to another as the pit is filled or the area becomes severely impacted from use. ...
-
Recreation and Heritage Resources Integrated Business Systems
This recreation resources management system identifies customer standards that the Forest Service expects to provide across all recreation and heritage resources program areas....
-
Pit Toilet
A pit toilet may be permanently installed or may be moved from one location to another as the pit is filled or the area becomes severely impacted from use....
-
4.4.3 Backrest and Armrest
When more than one bench is provided in the same area, at least 50 percent of the benches shall have a backrest running the full length of the bench....
-
4.4.1 General
Section 4.3.1 does not apply to built-in benches provided in assembly areas such as amphitheaters. These benches are covered by sections F221.2.1.1, F221.2.2, and 903 of the ABAAS....
-
Rotational Penetrometer
The instrument used in field-testing to test for compliance with the Outdoor Developed Areas Guidelines firmness and stability recommendations....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of 1/2 inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...