Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
Search Results "State Requirement"
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
-
11B-707 Automatic teller machines, fare machines and point-of-sale devices
However, for entities covered by the ADA, the Department of Justice regulations that implement the ADA provide additional guidance regarding the relationship between these requirements and...
-
Height: ADA Standard Section 704.4.1
EXCEPTION: Where seats are provided, TTYs shall not be required to comply with 704.4.1. Advisory 704.4.1 Height....
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
Signs required by Chapter 10, Section 1009.11 to provide instructions in areas of refuge shall comply with Section 11B-703.5....
-
ADA25: #14 of 25 -- Police
Even though they are required to follow the ADA, the police present a particularly sticky situation for the ADA. Not everything they do requires interpreters....
-
11B-808.3 Clear floor space
Exception: In alterations, wheelchair spaces are not required to be located within the defined area of raised jury boxes or witness stands and shall be permitted to be located outside these...
-
11B-505.3 Continuity
Exception: In assembly areas, ramp handrails adjacent to seating or within the aisle width shall not be required to be continuous in aisles serving seating....
-
Seats: ADA Standard Section 608.4
Section 608.4 covers the current ADA Standards for seats in shower compartments.
-
Clearances: ADA Standard Section 1002.4.4
Where provided, securement devices shall be permitted to overlap required clearances. 2. Wheelchair spaces shall be permitted to be mechanically or manually repositioned. 3....
-
Scope: ADA Standard Section 1001.1
The provisions of Chapter 10 shall apply where required by Chapter 2 or where referenced by a requirement in this document. Advisory 1001.1 Scope....
-
Pool Lift Location: ADA Standard Section 1009.2.1
Where the entire pool depth is greater than 48 inches (1220 mm), compliance with 1009.2.1 shall not be required. 2....
-
11B-217.5 Shelves for portable TTYs
Exceptions: Secured areas of detention and correctional facilities where shelves and outlets are prohibited for purposes of security or safety shall not be required to comply with...
-
1018.5 Aisles in other than assembly spaces and Groups B and M
assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load served, but the width shall be not less than that required...
-
11B-217.5 Shelves for portable TTYs
Exceptions: Secured areas of detention and correctional facilities where shelves and outlets are prohibited for purposes of security or safety shall not be required to comply with...
-
11B-505.3 Continuity
Exception: In assembly areas, ramp handrails adjacent to seating or within the aisle width shall not be required to be continuous in aisles serving seating....
-
11B-703.5 Visual characters
Exception: Where visual characters comply with Section 11B-703.2 and are accompanied by Braille complying with Section 11B-703.3, they shall not be required to comply with Sections 11B-703.5.2...
-
11B-403.7 Continuous gradient
ETA Editor's Note CBC requirement 11B-403.7 is not present in the 2010 ADA Standards. Therefore, CBC requirements related to continuous gradients are more stringent....
-
11B-808.3 Clear floor space
Exception: In alterations, wheelchair spaces are not required to be located within the defined area of raised jury boxes or witness stands and shall be permitted to be located outside these...
-
11B-703.5 Visual characters
Exception: Where visual characters comply with Section 11B-703.2 and are accompanied by Braille complying with Section 11B-703.3, they shall not be required to comply with Sections 11B-703.5.2...
-
11B-403.7 Continuous gradient
ETA Editor's Note CBC requirement 11B-403.7 is not present in the 2010 ADA Standards. Therefore, CBC requirements related to continuous gradients are more stringent....
-
III-6.2000 Alterations: Path of travel
The Department's regulation states that alterations to windows, hardware, controls, electrical outlets, and signs do not trigger path of travel requirements....
-
TownSteel CP Series Grade 3 Cylindrical Lockset Cylindrical Locks
Schlage "C" keyway Keying KD Standard, KA, MK, GMK optional Handing Non-Handed Finish US26D and US10B Packaging 12sets/carton Code Compliance Meets ANSI/BHMA A156.2 Grade 3 requirements...
-
Corbin Russwin Inc. ED4000 Series Narrow Stile Exit Device
Features Meets ANSI Grade 1 requirements Easy-to-use pushpad for quick egress and ADA compliance Low projection for barrier-free code compliance Heavy-duty...
-
UltraPlay Poured-in-Place Rubber Surface
Requires scheduled delivery and installation. ...
