Additional landing length may be provided across the entire landing width or as a level extension at the top of the ramp run. ◼...
Search Results "Floor-Level Exit Sign"
-
11B-405.7.2.1
-
C. Raised Porches Are Part Of the Store That Must Be Made Accessible and Located On An Accessible Route
Pursuant to Chapter 3, accessible spaces must have compliant floor surfaces, compliant turning space, and compliant clear floor space, among other requirements. 2010 Standards, §§ 301-309...
-
11B-411.4.5 Illumination
The level of illumination at the car controls shall comply with Section 11B-407.4.5....
-
Berm
Berm - A sloped surface at ground level designed to ascend or descend in elevation....
-
§ 36.308(a)(1)(ii)(A)
(A) Are an integral part of the seating area and are dispersed to all accessible seating levels; and...
-
E1-5. Elevator
Is an elevator provided to access the voting area level? Yes _____ No _____...
-
4.1.2(4)
(4) Stairs connecting levels that are not connected by an elevator shall comply with 4.9....
-
11B-411.4.5 Illumination
The level of illumination at the car controls shall comply with Section 11B-407.4.5....
-
§ 37.155(a)(7)
(7) The current level of accessible service, both fixed route and paratransit;...
-
11B-411.4.5 Illumination
The level of illumination at the car controls shall comply with Section 11B-407.4.5....
-
Innerface Clearview Interior Signage
Clients can choose from a variety of spacer depths to float the signs off of a mounting surface or mount directly....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-809.10.8.1 Location
The top of the lavatory rim shall be 34 inches (864 mm) maximum above the finished floor....
-
11B-809.10.8.1 Location
The top of the lavatory rim shall be 34 inches (864 mm) maximum above the finished floor....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
407.2.2.2 Visible Signals
Visible signal fixtures shall be centered at 72 inches (1830 mm) minimum above the finish floor or ground....
-
Protrusions
Where a wheelchair space is located on a ride, nothing may protrude into the front of the wheelchair space 9 inches from the floor....
-
Gaps
Gaps Where wheelchair spaces are provided on amusement rides, the floors of rides must be coordinated with the floors of the load and unload areas so that when the ride is at the...
-
407.2.2.2 Visible Signals
Visible signal fixtures shall be centered at 72 inches (1830 mm) minimum above the finish floor or ground....
-
Do all state and local buildings need to be accessible (comply with the ADA Standards for Accessible Design?)
In a two story town hall built in 1968 that doesn’t have an elevator, staff on the second floor could meet with citizens on the first floor if meeting space is comparable to that on the...
-
M303.2.4.2 Knee Clearance
Knee clearance shall be provided at a depth of 11 inches (280 mm) minimum and 25 inches (635 mm) maximum at 9 inches (230 mm) above the floor and at a depth of 8 inches (205 mm) minimum...
-
Table 2: Summary of Department of Transportation Survey
±1/2" (±13 mm) 15 Horizontal placement of poles, controls, signs, etc. 0 12 in. 2.62 in....
-
Car Position Indicators [4.10.13]
Verbal announcements must announce each floor a car stops at but not each floor passed....
-
1.2.3
Within 10 days of the project completion, a DSA-certified project inspector shall sign and submit a verified report to DSA indicating that the completed project is in conformance with the...
