Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
Search Results "Floor Slope"
Filters
Commonly Searched Documents
-
AJW Architectural Products UG2-A Series UG2-A12 12" Concealed Snap Flange, 1.25" Diameter Grab Bar - Configuration A
-
AJW Architectural Products UG120-A Series UG120-A12 12" Exposed Flange, 1.25" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
Serving Counters
Serving Counters Where food or drinks are served at counters and the counter height is more than 34 inches above the floor, providing a lowered section of the serving counter at least...
-
703.5.5 Character Height
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum Character Height 40 Inches...
-
206 Accessible Routes
between facilities and public streets and sidewalks, parking, passenger loading zones, and public transportation stops (206.2.1) revising the requirement for accessible routes between floor...
-
703.5.5 Character Height
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum Character Height 40 Inches...
-
2010 ADA Standards
“1½ inches plus or minus X inches. ”Where the requirement states a specified range, such as in Section 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor...
-
F213.2 Toilet Rooms and Bathing Rooms
existing toilet or bathing rooms shall not be required where a single unisex toilet room or bathing room complying with F213.2.1 is provided and located in the same area and on the same floor...
-
104.1.1 Construction and Manufacturing Tolerances
Where the requirement states a specified range, such as in Section 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...
-
703.5.5 Character Height
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum Character Height 40 Inches...
-
A. Background
physical disabilities lines of sight that are comparable to those for members of the general public, in that most or all of the wheelchair locations do not provide a line of sight to the floor...
-
National Network of ADA Centers
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....
-
213.2 Toilet Rooms and Bathing Rooms
existing toilet or bathing rooms shall not be required where a single unisex toilet room or bathing room complying with 213.2.1 is provided and located in the same area and on the same floor...
-
104.1.1 Construction and Manufacturing Tolerances
Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance...
-
Section 35.151(h) Medical Care Facilities (Section-by-Section Analysis)
to distribute these rooms among each of the specialty areas, would it be appropriate to require the accessible rooms to be dispersed so that there are accessible patient rooms on each floor...
-
213.2 Toilet Rooms and Bathing Rooms
existing toilet or bathing rooms shall not be required where a single unisex toilet room or bathing room complying with 213.2.1 is provided and located in the same area and on the same floor...
-
703.5.5 Character Height
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum...
-
1 - Design and drawing
Tolerances do not apply where a requirement states a range; for example, that grab bars must be installed between 33 inches and 36 inches above the finished floor....
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
11B-213.2 Toilet rooms and bathing rooms
shall not be required where a single unisex (single-user or family) toilet room or bathing room complying with Section 11B-213.2.1 is provided and located in the same area and on the same floor...
-
Section 4.1.3, Accessible Buildings: New Construction (Preamble, Section-by-Section Analysis)
Sections 4.1.3 (1) through (4) cover accessible routes, protruding objects, ground and floor surfaces, and stairs....
-
804 Kitchens and Kitchenettes
This is consistent with the proposed rule with respect to kitchens generally, but differs from proposed specifications for dwelling unit kitchens, which only addressed clear floor space...
