Section 100.205(c)(3)(iv) requires that covered multifamily dwellings with a building entrance on an accessible route shall be designed and constructed in such a manner that all premises...
Search Results "Designed Use"
-
Requirement 7. Usable kitchens and bathrooms.
-
You must ensure that there is space to stow at least one folding wheelchair
You must ensure that there is space for at least one passenger with a disability to stow a folding wheelchair in the cabin of the aircraft if the aircraft has a designed seating capacity...
-
"2010 Standards" (Section-by-Section Analysis)
The term ‘‘2010 Standards'' refers to the 2010 ADA Standards for Accessible Design, which consist of the 2004 ADAAG and the requirements contained in subpart D of 28 CFR part 36....
-
1133A.2.1, Item 2
U-shaped kitchens, designed with a cooktop or sink located at the base of the U, which provides a knee and toe space in accordance with Section 1133A.7 to allow for a forward approach, shall...
-
Parallel Curb Ramps
This design provides an option where limited space precludes a top landing....
-
1133A.2.1, Item 2
U-shaped kitchens, designed with a cooktop or sink located at the base of the U, which provides a knee and toe space in accordance with Section 1133A.7 to allow for a forward approach, shall...
-
11B-238.3 Practice putting greens, practice teeing grounds, and teeing stations at driving ranges
At least 5 percent, but no fewer than one, of practice putting greens, practice teeing grounds, and teeing stations at driving ranges shall be designed and constructed so that a golf car...
-
11B-238.3 Practice putting greens, practice teeing grounds, and teeing stations at driving ranges
At least 5 percent, but no fewer than one, of practice putting greens, practice teeing grounds, and teeing stations at driving ranges shall be designed and constructed so that a golf car...
-
ELEVATOR, PASSENGER
[DSA-AC] An elevator used primarily to carry passengers....
-
ELEVATOR, PASSENGER
[DSA-AC] An elevator used primarily to carry passengers....
-
11B-104.1.1 Construction and manufacturing tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
11B-104.1.1 Construction and manufacturing tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
Garaventa Xpress II Inclined Platform Wheelchair Lift Operation Video
Garaventa Xpress II is an inclined platform lift designed for a straight staircase with no intermediate landings....
-
Aquatic Access Pool Lift IGAT-180-AD
Model IGAT-180 AD IN-GROUND AUTOMATIC TURN OF 180 DEGREES FOR POOLS AND SPAS WITH AUTOMATIC POOL COVERS OR UNUSUAL DESIGN Meets 2010 Standards for Accessible Design (ADA)....
-
Ability Self-Assessment
Yes No Have you evaluated your ability to use them?...
-
International Center for Disability Resources
Mission and Values Founded in 1998, The International Center for Disability Resources on the Internet (ICDRI) is a non-profit center based in the United States and designated as a 501...
-
ACO Premium Linear QuARTz Drain
QuARTz linear shower drains are designed to last....
-
How New Technology Helps Blind People Explore the World | Chieko Asakawa | TED Talks
How can we navigate the world without using the sense of vision?...
-
Wooster Products Inc. Stairmaster Safety Renovation Treads
Stairmaster Safety Renovation Treads are designed for the modernization and restoration of all types of stairs, while also providing excellent anti-slip protection for pedestrians....
-
Site Arrival Points: ADA Standard Section 206.2.1
Section 206.2.1 covers the scoping requirements for site arrival points of accessible routes in the most current ADA Standards.
-
Sec.36.101 Purpose
of 1990 (42 U.S.C. 12181), which prohibits discrimination on the basis of disability by public accommodations and requires places of public accommodation and commercial facilities to be designed...
-
1007 Miniature Golf Facilities
This section covers miniature golf courses and contains specifications for accessible routes that take into account design conventions for miniature golf courses, such as carpeted play surfaces...
-
Self Contained, Closed Products
Products that generally have embedded software and are commonly designed in such a fashion that a user cannot easily attach or install assistive technology. ...
-
Step-by-Step Guide
The guide has been arranged in four steps and provides spaces to fill in numeric values of play components for evaluating a specific play area design....
