The width of any component in the means of egress system shall not be less than the minimum width required by Section 1005....
Search Results "Hybrid Surface System"
-
1132A.3, Item 6
-
§ 37.83(a)
(a) This section applies to any public entity operating a rapid or light rail system which takes one of the following actions:...
-
§ 37.133(a)
(a) This part does not prohibit the use of subscription service by public entities as part of a complementary paratransit system, subject to the limitations in this section....
-
§ 37.131(a)(2)(i)
(i) For rail systems, the service area shall consist of a circle with a radius of 3/4 of a mile around each station....
-
§ 37.165(c)(1)
(1) For vehicles complying with part 38 of this title, the entity shall use the securement system to secure wheelchairs as provided in that Part....
-
Tread Width
The visible trail surface measured perpendicular to the direction of travel....
-
¾ Inch Minus Limestone
After the same two days of uncharacteristically heavy rainfall (as noted in the ¼ inch minus segment), the surface had evidence of water pooling on the surface, as there were lines of pine...
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
11B-403.5.1 Clear width
Except as provided in Sections 11B-403.5.2 and 11B-403.5.3, the clear width of walking surfaces shall be 36 inches (914 mm) minimum....
-
11B-403.5.1 Clear width
Except as provided in Sections 11B-403.5.2 and 11B-403.5.3, the clear width of walking surfaces shall be 36 inches (914 mm) minimum....
-
810 Transportation Facilities
The Board has explicitly specified that rail platforms shall slope no more than 1:48 in any direction, consistent with cross slope provisions for walking surfaces in section 403....
- Guldmann Basic High Sling
-
Telecommunications. (Section-by-Section Analysis)
address situations in which a public accommodation must provide an effective means to communicate by telephone for individuals with disabilities, including the use of automated attendant systems...
-
11B-217.4 TTYs
Consideration should be given to phone systems that can accommodate both digital and analog transmissions for compatibility with digital and analog TTYs. ◼...
-
11B-217.4 TTYs
Consideration should be given to phone systems that can accommodate both digital and analog transmissions for compatibility with digital and analog TTYs. ◼...
-
Amusement Rides: ADA Standard Section 216.12
Section 216.12 covers scoping requirements in the current ADA Standards for signs at amusement rides.
-
Syngas Fuel Saver: Improve Fuel Efficiency and Lower Operating Costs
Syngas Fuel Saver Before understanding the fuel saver system, it is important to understand Syngas (Synthetic Gas)....
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
-
M302.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
- GameTime Sounds of Water Panel
-
12143(c)(7) Plans
(7) Plans The regulations issued under this section shall require that each public entity which operates a fixed route system...