Ramps shall have the least slope practicable and shall not exceed 1:4 when deployed to ground level....
Search Results "Ramp Width"
Commonly Searched Documents
- 
    
  
  § 38.23(c)(5) Slope
  
- 
    
  
  Entrances
  All door openings must provide a minimum width of 32 inches and there must also be enough room for a person using a wheelchair to maneuver to open the door, including 18 inches of clear... 
- 
    
  
  405.6 Rise
  The rise for any ramp run shall be 30 inches (760 mm) maximum.... 
- 
    
  
  405.6 Rise
  The rise for any ramp run shall be 30 inches (760 mm) maximum.... 
- 
    
  
  11B-405.6 Rise
  The rise for any ramp run shall be 30 inches (762 mm) maximum.... 
- 
    
  
  11B-405.6 Rise
  The rise for any ramp run shall be 30 inches (762 mm) maximum.... 
- 
    
  
  11B-405.6 Rise
  The rise for any ramp run shall be 30 inches (762 mm) maximum.... 
- 
    
  
  405.6 Rise
  The rise for any ramp run shall be 30 inches (760 mm) maximum.... 
- 
    
  
  T402.5 Surfaces
  Ramp and bridgeplate surface material shall comply with T302 and extend across the full width and length of the ramp or bridgeplate.... 
- 
    
  
  R304 Curb Ramps and Blended Transitions
  R304 Curb Ramps and Blended Transitions... 
- 
    
  
  R304 Curb Ramps and Blended Transitions
  R304 Curb Ramps and Blended Transitions... 
- 
    
  
  R207 Curb Ramps and Blended Transitions
  R207 Curb Ramps and Blended Transitions... 
- 
    
  
  11B-411.3.5 Width
  The width of elevator doors shall comply with Table 11B-407.4.1.... 
- 
    
  
  11B-411.3.5 Width
  The width of elevator doors shall comply with Table 11B-407.4.1.... 
- 
    
  
  11B-411.3.5 Width
  The width of elevator doors shall comply with Table 11B-407.4.1.... 
- 
    
  
  11B-403.5.1 Clear width
  The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated by segments that... 
- 
    
  
  Clear Tread Width and Passing Spaces for Outdoor Recreation Access Routes
  Clear tread width means the width of the traveled surface on the ground and also above the ground between obstacles (figure 40).... 
- 
    
  
  11B-403.5.1 Clear width
  The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated by segments that... 
- 
    
  
  11B-403.5.1 Clear width
  Exceptions: The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated... 
- 
    
  
  1130A.2 Width
  The accessible route into and throughout covered multifamily dwelling units shall be at least 36 inches (914 mm) wide. 
- 
    
  
  1130A.2 Width
  The accessible route into and throughout covered multifamily dwelling units shall be at least 36 inches (914 mm) wide. 
- 
    
  
  § 38.83(b)(8) Platform entrance ramp
  (8) Platform entrance ramp.... 
- 
    
  
  Curb Ramps at Marked Crossings and Vehicular Lanes
  Section 406.5 specifies the location of curb ramps at marked crossings.... 
- 
    
  
  11B-406.1 General
  Curb ramps, blended transitions and islands on accessible routes shall comply with Section 11B-406.... 
