Electric vehicle charging stations (EVCS) shall comply with Section 11B-812 as required by Section 11B-228.3....
Search Results "Rail Vehicle"
Commonly Searched Documents
- 
    
  
  11B-812.1 General
  
 - 
    
  
  Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
  
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48...
 - 
    
  
  Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
  
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48 inches.
 - 
    
  
  12184(c) Historical or antiquated cars
  
(c) Historical or antiquated cars
 - 
    
  
  § 38.23(b)(2) Controls
  
(2) Controls—
 - 
    
  
  § 38.23(b)(4) Power or equipment failure
  
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
 - 
    
  
  § 38.83(c)(6)(i) Requirement
  
When in use for boarding or alighting, the ramp or bridge plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to displacement when loading...
 - 
    
  
  § 37.42(f)
  
Where the horizontal gap is more than 3 inches and/or the vertical gap is more than 5/8 inch, measured when the vehicle is at rest, the horizontal and vertical gaps between the car floor...
 - 
    
  
  § 38.23(c)(6) Attachment
  
When in use for boarding or alighting, the ramp shall be firmly attached to the vehicle so that it is not subject to displacement when loading or unloading a heavy power mobility aid and...
 - 
    
  
  Requirements to Remember for: Remanufacture or Rebuilt Vehicles
  
[See subsections ...]
 - 
    
  
  11B-228.3 Electric vehicle charging stations
  
[See subsections ...]
 - 
    
  
  11B-228.3 Electric vehicle charging stations
  
[See subsections ...]
 - 
    
  
  § 38.23(b)(8) Platform entrance ramp
  
(8) Platform entrance ramp. The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, measured on level ground, for a maximum rise of 3 inches, and...
 - 
    
  
  11B-228.3.2 Minimum number
  
Where an EV charger can simultaneously charge more than one vehicle, the number of EV chargers provided shall be considered equivalent to the number of electric vehicles that can be simultaneously...
 - 
    
  
  12162(a)(1) One car per train rule
  
(1) One car per train rule It shall be considered discrimination for purposes of section 12132 of this title and section 794 of title 29 for a person who provides intercity rail transportation...
 - 
    
  
  § 38.53(b) Signage
  
The International Symbol of Accessibility shall be displayed on the exterior of accessible vehicles operating on an accessible rapid rail system unless all vehicles are accessible and are...
 - 
    
  
  10.3.1(10)
  
(10) Stations shall not be designed or constructed so as to require persons with disabilities to board or alight from a vehicle at a location other than one used by the general public....
 - 
    
  
  § 38.75(a)
  
(a) Each vehicle shall contain sign(s) which indicate that certain seats are priority seats for persons with disabilities, and that other passengers should make such seats available to those...
 - 
    
  
  § 38.159(c)(5) Slope
  
If the height of the vehicle floor from which the ramp is deployed is 3 inches (75 mm) or less above a 6 inch (150 mm) curb, a maximum slope of 1:4 is permitted; if the height of the vehicle...
 - 
    
  
  For EV with the charging port at rear of the vehicle, can EV be assumed to be able to back in the parking space for easy access to the charger at the head location?
  
RESPONSE: This practice is not regulated by the CBC Chapter 11B accessibility provisions. DSA is not aware of any restrictions on this practice.
 - 
    
  
  11B-812.8.4 Ambulatory
  
Ambulatory EVCS shall not be required to be identified by an ISA.
 - 
    
  
  11B-812.8.6 Finish and size
  
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2).
 - 
    
  
  Can an operator require a person to transfer from a wheelchair to a vehicle seat?
  
Section 37.165(e) of the DOT ADA regulations allows persons who use wheelchairs to transfer to a vehicle seat, if one is available....
 - 
    
  
  Can an operator require a person to transfer from a wheelchair to a vehicle seat?
  
Section 37.165(e) of the DOT ADA regulations allows persons who use wheelchairs to transfer to a vehicle seat, if one is available....