Section 235.2.1 covers scoping requirements in the current ADA Standards for dispersion of boat slips.
Search Results "Military Base"
-
Dispersion: ADA Standard Section 235.2.1
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
11B-703.2.7 Character spacing
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
11B-703.2.7 Character spacing
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
BEA Inc. LZR-Microscan Swinging Door Sensor
The LZR-microscan automatically adapts and adjusts its detection zones based on the door's position, ensuring complete and consistent safety. ...
-
Hoyer Journey Stand-Up Lift
folding design allows the Journey to stand unaided Adjustable cow-horn mechanism supports a range of patient sizes Adjustable kneepad Bump guard protects against base...
-
M305.3.2 Height
The height of gripping surfaces for standing supports shall be based on the position of the standing supports in relation to the standing surfaces they serve....
-
404.3.1 Clear Width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
§8.4(e)
(e) The obligation to comply with this part is not obviated or alleviated by any State or local law or other requirement that, based on handicap, imposes inconsistent or contradictory prohibitions...
-
A4.2.4 CLEAR FLOOR OR GROUND SPACE FOR WHEELCHAIRS
The space requirements in this standard are based upon maneuvering clearances that will accommodate most larger wheelchairs. Fig....
-
2.4.1
2.4.1 Based on the methods for measuring compliance, define what remedial actions are acceptable when construction elements exceed tolerances....
-
§ 38.159(a)(2) Exception
If portable or station-based lifts, ramps or bridge plates meeting the applicable requirements of this section are provided at stations or other stops required to be accessible under regulations...
-
Equalizer 1000 Series Exercise Machine
Station 2: Seated Military Press This exercise works the chest, shoulder, back and tricep muscles. The handle is fully adjustable to allow for your individual height. ...
-
Hill-Rom Liko® M220 / M230 Mobile Lift
Base-width Base-width adjustment on the M230 is electrically operated and on the M220 lift the base is easily widened with a pedal....
-
Mockett CH11 Longhorn Coat Hook
Size: 5 9/32" wide, 1 31/32" base diameter, 1 25/32" projection. Mounting hardware included. Finish: Base is Polished Chrome....
-
Magnuson Group KOBE Hook
Post color can be different than base, umbrella ring and hook support. Post, base, umbrella ring and hook support in Silver, White, Black, Sand, Chocolate or Green....
-
Polypavement
The Polypavement is applied to a base of compacted native soils and is then mixed into an additional 2 inches of tilled soil....
-
Salsbury Industries See Through Metal Locker
Requires the Registered User plan or above. Login! -
410.4.2 Digital Wireline (Section-by-Section Analysis)
410.4.2 Digital Wireline (Section-by-Section Analysis) This section proposes that ICT in the form of digital wireline devices (such as VoIP-based office desk telephones) would be required...
-
Free-standing and Post-mounted Objects
This is based on standard measures for cane sweep. Objects with leading edges at or below 27 inches or above 80 inches can protrude any amount....
-
Assumptions
Access Board published values for firmness and stability in the NPRM for Outdoor Developed Areas based on use of the Rotational Penetrometer....
-
804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1525...
-
§382.57(c)(7)(ii) Characters
Characters must be 3/16 inch (4.8 mm) high minimum based on the uppercase letter “I.” Characters must contrast with their background with a minimum luminosity contrast ratio of 3:1....
