Since the height of reach decreases with depth, the maximum high reach is limited to 46 inches over obstructions no more than 24 inches deep and 34 inches high....
Search Results "Maximum Extent Practicable"
-
Side Reach [4.2.6]
-
Bed Height Fact Sheet
To Comply with Best Practice Standards: Require beds in the accessible guest rooms to measure between 17-23 inches high from the floor to the top of an uncompressed mattress....
-
1.1.7 Measurement of parking areas
These areas should be considered as a pedestrian walk with a minimum width of 60 in. and a length of approximately 20 ft and with an ADA/ABA - AG maximum slope of 1:48 in both directions...
-
Best Practices for Accessible Prescription Drug Labeling Brochure
Best Practices for Accessible Prescription Drug Labeling Brochure: http://www.ncd.gov/sites/default/files/ADLP_508.pdf Pharmacies have a critical role to play to ensure the safety of...
-
Existing Elevators (Alterations)
Provisions or Exceptions Specific to Existing (Altered) Elevators Recommendation: For greater usability, make those altered elements covered by an exception fully comply wherever practicable...
-
The ADA and Its Integration Mandate
the “integration mandate” regulation explains that “the most integrated setting” is one that “enables individuals with disabilities to interact with nondisabled persons to the fullest extent...
-
§ 35.130 General prohibitions against discrimination
* * * * * (b) * * * (7)(i) A public entity shall make reasonable modifications in policies, practices, or procedures when the modifications are necessary to avoid discrimination...
-
Make Technology Work for Everyone: introducing digital accessibility
Published on May 21, 2015 This short animated film provides • A short introduction to digital accessibility, • Some reasons why digital inclusion is important, • 15 tips to...
-
Electronic documents implementation
File formats for images and compatibility with alt-text in electronic documents. Image File Format File Extensions Microsoft® Word PDF...
-
III-4.2000 Reasonable modifications
[See subsections ...]
-
1.1.8 Alternate measurement tools
1.1.8 Alternate measurement tools. Walks may be measured with instruments other than a digital inclinometer if they provide the data required for evaluation of tolerances as given in...
-
1.1.13 Flatness of ramp running slope
1.1.13 Flatness of ramp running slope. Measure flatness in the running slope of ramps at 12 - in. (300 mm) increments by using successive, overlapping 24 - in. (600 mm) lengths using...
-
4.34.3(2)(b) Reach Depth More Than 10 in
the vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion of the automated teller machine or surround is more than 10 in (255 mm), the maximum...
-
4.34.3(2)(a) Reach Depth Not More Than 10 in
vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion of the automated teller machine or surround is not more than 10 in (255 mm), the maximum...
-
UNITED STATES OF AMERICA v. METROPOLITAN TRANSPORTATION AUTHORITY and NEW YORK CITY TRANSIT AUTHORITY - OPINION & ORDER
UNITED STATES DISTRICT COURT SOUTHERN DISTRICT OF NEW YORK BRONX INDEPENDENT LIVING SERVICES, a nonprofit organization; DISABLED IN ACTION OF METROPOLIAN NEW YORK, a nonprofit...
-
Q9: Pavement Preservation Treatment Types
A9: New treatments are always being developed and the best practice is for the City or other local public entity conducting the work, the State transportation agency, and FHWA to work together...
-
Section 35.136 Service animals. (Section-by-Section Analysis)
(Section-by-Section Analysis) The 1991 title II regulation states that ‘‘[a] public entity shall make reasonable modifications in policies, practices, or procedures when the modifications...
-
Section 504
disabilities.[5] These regulations also require that facility alterations commenced after June 3, 1977, that affect or may affect the facility's usability must be accomplished so that, to the maximum...
-
§8.51 Self-evaluation.
(Approved by the Office of Management and Budget under control number 2529-0034) [53 FR 20233, June 2, 1988, as amended at 54 FR 37645, Sept. 12, 1989]
-
§35.105 Self-evaluation
§35.105 Self-evaluation.
-
§ 36.302(f)(5) Hold and release of tickets for accessible seating
(5) Hold and release of tickets for accessible seating.
-
Step 2: Identify the Presence of Limiting Factors
This step addresses the condition criteria accepted by the U.S. Access Board for identifying when extreme environmental barriers allow the use of General Exception 2. These barriers...
-
1.1.10 Ramps
1.1.10 Ramps. Measure accessible ramps for overall running slope and cross slope as well as local running slope and cross slope variations (flatness) in accordance with Sections...
-
1.1.14 Flatness of ramp cross slope
1.1.14 Flatness of ramp cross slope. For ramps, measure flatness of cross slope by placing a 24 - in. (600 mm) digital inclinometer perpendicular to the line of travel at 4 ft (1200...