Section 37.165 Lift and Securement Use This provision applies to both public and private entities....
Search Results "Ceiling Mounted Patient Lift"
Commonly Searched Documents
-
Section 37.165 Lift and Securement Use
- S.R. Smith MultiLift Pool Lift Video 1: Installation, Operation, and Maintenance
-
S.R. Smith aXs Pool Lift Video 3: Resolution
Requires the Registered User plan or above. Login!
-
S.R. Smith aXs Pool Lift Video 2: Advanced Troubleshooting
Requires the Registered User plan or above. Login!
-
M301.2.3 Transfer Sides
The location of the Transfer Side will be located on the patient right or patient left at roughly midway between the foot end and head end....
-
5.4.4.1 Transfer Support Distance from Transfer Surface for Stretchers
The horizontal distance from the transfer surface should be no more than 3 inches from the edge of the patient support surface....
- Patriot Portable Lift by Aqua Creek Products
-
M302.3.2 Armrests
Where diagnostic equipment is used by patients in a seated position, armrests shall be provided. Advisory M302.3.2 Armrests....
-
5.4.1.2 Transfer and Positioning Support Location Recommendations for Imaging Equipment with Transfer Surfaces
For wider tables, a transfer support would not be functional because of its distance from the patient....
- Garaventa Xpress II Inclined Platform Wheelchair Lift Operation Video
-
4. Organization of Technical Criteria
each of the patient positions; and the types of equipment to which the technical criteria apply for each of the patient positions....
-
15. Can I store my lift and bring it out only when it is requested by a person with a disability?
Can I store my lift and bring it out only when it is requested by a person with a disability? No....
-
M301.1 General
Where diagnostic equipment is used by patients in a supine, prone, or side-lying position, it shall comply with M301....
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
OTHER QUESTIONS
[See subsections ...]
-
§ 38.23(b)(2) Controls
(2) Controls—
-
§ 38.23(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
4. My pool already existed before the effective date of the new rule. What am I required to do to provide pool access to customers with mobility disabilities?
The 2010 Standards for pool lifts require lifts to be fixed and to meet additional requirements for location, size of the seat, lifting capacity, and clear floor space....
-
5.2.1.4 Transfer Surface Size Recommendations for Imaging Equipment (M301)
The transfer surface must be located so the 28-inch long dimension is parallel to the patient scanning/imaging side of the table....
-
§ 38.83(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll) in any direction between its unloaded position and its position when...
-
Section H: Lifts
Yes No N/A Comments/Remedies H1 Is the lift operational at the time of the survey?...
-
Figure M4: Overview of M303 Diagnostic Equipment for Use by a Patient While Seated in a Wheelchair and M304 Diagnostic Equipment for Use by a Patient in a Standing Position (Weight Scale Example)
Where the primary use of the equipment supports more than one patient position, it must comply with the requirements for each use. ...
-
§ 38.23(b)(10) Platform movement
No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during deploying or stowing....