(c) Entities to which this part applies also may be subject to ADA regulations of the Department of Justice (28 CFR parts 35 or 36, as applicable)....
Search Results "ADA Compliance"
-
§ 37.21(c)
-
11B-503.3.3 Marking
[2010 ADA Standards] 503.3.3 Marking. Access aisles shall be marked so as to discourage parking in them....
-
TownSteel FME4030 Mortise Lockdown Rigid Trim Security Cylinder
construction available Finish: US26D and US10B stocked, other upon request Warranty: 1-year limited for electronic, 5-year limited for finish, 10-year limited for mechanical CODE COMPLIANCE...
-
TownSteel MSE-32-II Classroom Intruder with Indicator on Inside Mechanical Mortise
keyway, 6pin, 2 keys per cylinder High Security SFIC Available, TownSteel "L" keyway, 7pin, 2 keys per cylinder Keying KD standard, KA, MK, GMK, GGMK, Construction Available Code Compliance...
-
TownSteel FME4020 Mortise Lockdown Clutched Trim
and construction available Finish: US26D and US10B stocked, other upon request Warranty: 1-year limited for electronic, 5-year limited for finish, 10-year limited for mechanical CODE COMPLIANCE...
-
TownSteel FME4010 Mortise Lockdown Rigid Trim RFID Mortise
and construction available Finish: US26D and US10B stocked, other upon request Warranty: 1-year limited for electronic, 5-year limited for finish, 10-year limited for mechanical CODE COMPLIANCE...
-
TownSteel FCE4030 Cylindrical Lockdown Rigid Trim Security Cylinder RFID Cylindrical
and construction available Finish: US26D and US10B stocked, other upon request Warranty: 1-year limited for electronic, 5-year limited for finish, 10-year limited for mechanical CODE COMPLIANCE...
-
TownSteel XME9040 Mortise, Clutched Trim Security Cylinder Mortise Keypad
and construction available Finish: US26D and US10B stocked, other upon request Warranty: 1-year limited for electronic, 5-year limited for finish, 10-year limited for mechanical CODE COMPLIANCE...
-
11B-1003.3.1 Boat slip clearance
permitted to be located perpendicular to the boat slip and shall extend the width of the boat slip, where the facility has at least one boat slip complying with Section 11B-1003.3, and further compliance...
-
11B-1003.3.1 Boat slip clearance
permitted to be located perpendicular to the boat slip and shall extend the width of the boat slip, where the facility has at least one boat slip complying with Section 11B-1003.3, and further compliance...
-
4.2 Existing Facilities.
An airport operator is not required to make structural changes to existing facilities where other methods are effective in achieving compliance....
-
11B-224.7 Housing at a place of education
Multi-bedroom housing units containing accessible sleeping rooms with mobility features shall have an accessible route throughout the unit in compliance with Section 11B-809.2....
-
Trash and Recycling Receptacles [1011.2 and 1011.3]
Until products with compliant operable parts become commercially available, compliance is required to the extent practicable....
-
7. APPLICABILITY
These standards shall also apply to existing leases, which shall be brought into compliance within five years of the date of this memorandum or upon extension or renewal of a lease after...
-
Principle of Reasonableness and Cost
In the preamble to the proposed guidelines, the Department stated in relevant part as follows: "These guidelines are intended to provide a safe harbor for compliance with respect to those...
-
Technical Memorandum TM 2013-19 Private Toilet and Bathing Rooms
This clarification does not constitute a substantive change to the compliance requirements of TAS 213.2 and 213.3....
-
7. Alternatives
Comments received from the public indicated that this approach was potentially confusing, as federal agencies, contractors, and vendors would have to make specific compliance determinations...
-
Availability of Proposed Guidelines with Figures
In the past, the Architectural and Transportation Barriers Compliance Board (Access Board) submitted “camera ready” copy (i.e., images) of its guidelines to the Federal Register for the...
-
Alterations: Alternate Stalls
Alterations: Alternate Stalls An alternate stall may be substituted for the standard stall only in alterations where full compliance with requirements for a wheelchair accessible stall...
-
1017.3 Clear Tread Width
distance of the trail and may not be reduced by gates, barriers, or other obstacles unless an entity determines under Exception 1 to 1017.1 that a condition in 1019 does not permit full compliance...
-
Treatment of Data
A bivariate correlation was run to determine any significance between surface deficiencies or non-compliance with the accessibility standards and the measurable results for firmness and...
-
1016.1 General
When an entity determines that a condition in 1019 does not permit full compliance with a specific provision in 1016 on a portion of an outdoor recreation access route, Exceptions 1 and...
-
Suggested best practices for architects and other design professionals
It is simply a matter of clearly communicating four things: (1) what is wanted, (2) the standards used, (3) how compliance will be verified, and (4) what the result of noncompliance will...
-
104.11 Alternative materials, design and methods of construction and equipment
ETA Editor's Note Sections from the California Building Code Chapter 1 that are not adopted by the Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
