(1) which is comparable to the level of designated public transportation services provided to individuals without disabilities using such system; or...
Search Results "Floor-Level Exit Sign"
Filters
Commonly Searched Documents
-
12143(a)(1)
-
E1-e
Is an elevator provided to each of the levels on which each sheltering service or activity area is located? Yes No...
-
3.1.2 Surface of Vehicle Parking Spurs
The type of surface should be appropriate to the setting and level of development....
-
§ 38.91(c)(2)
(2) Where level boarding is structurally or operationally impracticable, commuter rail cars shall comply §38.95 of this part....
-
§ 38.111(a)(3)
(3) Bi-level dining cars shall comply with §§38.113(a)(2), 38.115(b), 38.117(a), and 38.121 of this part....
-
1016.9 Protruding Objects
Signs and other post mounted objects are examples of constructed elements that can be protruding objects....
-
F216.5 Parking
Parking spaces complying with 502 shall be identified by signs complying with 502.6. EXCEPTIONS: 1....
-
216.5 Parking
Parking spaces complying with 502 shall be identified by signs complying with 502.6. EXCEPTIONS: 1....
-
1016.9 Protruding Objects
Signs and other post mounted objects are examples of constructed elements that can be protruding objects....
-
Temporary Solutions for Election Day - Hallways and Corridors - Voters Who are Blind or Who Have Low Vision
The bottom of the skirting or detectable object must be no higher than 27 inches above the floor....
-
4.1.3(17)(a)
are provided, then they shall comply with 4.31.2 through 4.31.8 to the extent required by the following table: Number of each type of telephone provided on each floor...
-
Willoughby Industries ADA Cabinet Shower US-FA-HC
Shower floor shall be fabricated from 11 gauge, type 304 stainless steel....
-
11B-407.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
4.34.3(2)(a) Reach Depth Not More Than 10 in
Where the reach depth to the operable parts of all controls as measured from the vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion...
-
11B-407.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
§ 38.95(b)(7) Platform gaps
When the lift is at car floor height with the inner barrier down (if applicable) or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally...
-
§ 38.125(b)(7) Platform gaps
When the lift is at car floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally...
-
11B-407.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
SIGNALIZATION OF ROUNDABOUTS
For example, a sign below the signal would read “stop on red”. A yield control would be in effect whether or not the meter was in use (i.e., the lenses were on)....
-
11B-603.4 Coat hooks, shelves and medicine cabinets
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
11B-308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side...
-
4.4.1* General
Objects projecting from walls (for example, telephones) with their leading edges between 27 in and 80 in (685 mm and 2030 mm) above the finished floor shall protrude no more than 4 in (100...
-
Destination-Oriented Elevators
Destination-oriented elevators are different from typical elevators in that they provide a means of indicating the desired floor at the location of the call button, usually through a key...
-
11B-704.2.1.2 Forward approach
Where a forward approach is provided at a telephone within an enclosure, the counter may extend beyond the face of the telephone 20 inches (508 mm) into the required clear floor or ground...
